GVM 90 H

Rotary fitting, angle 90°, friction bearing

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric cylindrical outer thread
Connection 2 metric cylindrical outer thread
Construction Angle 90°
Construction type Friction bearing
Design Rotary fitting (screw-in connector)
Material Steel
Scope of supply Socket (without union nut and cutting ring)
Sealing form 1 Shape E
Sealing form 2 24° inner cone
Surface electro galvanised

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name H mm L2 mm Operating pressure i mm L1 mm G2 L3 mm External pipe Ø mm S1 d3 mm AF mm G1 Series Ø d2 mm
Product Name H mm L2 mm Operating pressure i mm L1 mm G2 L3 mm External pipe Ø mm S1 d3 mm AF mm G1 Series Ø d2 mm
GVM 90 NW 04 HL H 7.0 21 PN 250 8 40 M 12 x 1,5 23 6 17 14 27 M 10 x 1 L 6
GVM 90 NW 04 HL 12 H 7.0 22 PN 250 12 41 M 12 x 1,5 23 6 17 14 27 M 12 x 1,5 L 6
GVM 90 NW 06 HL H 7.0 22 PN 250 12 41 M 14 x 1.5 23 8 19 17 27 M 12 x 1,5 L 8
GVM 90 NW 08 HL H 7.0 25 PN 250 12 46 M 16 x 1.5 26 10 22 19 30 M 14 x 1.5 L 10
GVM 90 NW 08 HL 16 H 7.0 27 PN 250 12 48 M 16 x 1.5 27 10 24 22 32 M 16 x 1.5 L 10
GVM 90 NW 10 HL H 7.0 27 PN 250 12 48 M 18 x 1.5 27 12 24 22 32 M 16 x 1.5 L 12
GVM 90 NW 10 HL 18 H 7.0 30 PN 250 12 55 M 18 x 1.5 29 12 27 24 36 M 18 x 1.5 L 12
GVM 90 NW 13 HL H 7.0 30 PN 250 12 55 M 22 x 1.5 30 15 27 24 36 M 18 x 1.5 L 15
GVM 90 NW 13 HL 22 H 7.0 33 PN 250 14 59 M 22 x 1.5 32 15 32 27 40 M 22 x 1.5 L 15
GVM 90 NW 16 HL H 7.5 33 PN 160 14 59 M 26 x 1.5 32 18 32 27 40 M 22 x 1.5 L 18
GVM 90 NW 20 HL H 7.5 35 PN 160 16 66 M 30 x 2 36 22 36 32 45 M 26 x 1.5 L 22
GVM 90 NW 25 HL H 7.5 41 PN 100 18 78 M 36 x 2 41 28 41 40 55 M 33 x 2 L 28
GVM 90 NW 32 HL H 10.5 50 PN 100 20 92 M 45 x 2 48 35 50 50 65 M 42 x 2 L 35
GVM 90 NW 40 HL H 11.0 56 PN 100 22 102 M 52 x 2 53 42 55 55 75 M 48 x 2 L 42
GVM 90 NW 03 HS H 7.0 22 PN 400 12 41 M 14 x 1.5 25 6 19 17 27 M 12 x 1,5 S 6
GVM 90 NW 03 HS 14 H 7.0 22 PN 400 12 41 M 14 x 1.5 25 6 19 19 27 M 14 x 1.5 S 6
GVM 90 NW 04 HS H 7.0 22 PN 400 12 41 M 16 x 1.5 25 8 19 19 27 M 14 x 1.5 S 8
GVM 90 NW 06 HS 14 H 7.5 25 PN 400 12 46 M 18 x 1.5 27 10 22 19 30 M 14 x 1.5 S 10
GVM 90 NW 06 HS H 7.5 25 PN 400 12 46 M 18 x 1.5 27 10 22 22 30 M 16 x 1.5 S 10
GVM 90 NW 08 HS H 7.5 27 PN 400 12 48 M 20 x 1.5 28 12 24 24 32 M 18 x 1.5 S 12
GVM 90 NW 10 HS 18 H 8.0 30 PN 400 14 55 M 22 x 1.5 32 14 27 24 36 M 18 x 1.5 S 14
GVM 90 NW 10 HS H 8.0 30 PN 400 14 55 M 22 x 1.5 32 14 27 26 36 M 20 x 1.5 S 14
GVM 90 NW 13 HS H 8.5 33 PN 400 14 59 M 24 x 1.5 34 16 32 27 40 M 22 x 1.5 S 16
GVM 90 NW 16 HS H 10.5 35 PN 250 16 66 M 30 x 2 38 20 36 32 45 M 27 x 2 S 20
GVM 90 NW 25 HS H 13.5 51 PN 160 20 92 M 42 x 2 52 30 50 50 65 M 42 x 2 S 30
GVM 90 NW 32 HS H 16.0 56 PN 160 22 102 M 52 x 2 59 38 55 55 75 M 48 x 2 S 38
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure
Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.