GVR

Rotary fitting, friction bearing



Properties

Connection 1 BSP external thread, cylindrical
Connection 2 metric cylindrical outer thread
Construction type Friction bearing
Design Rotary fitting (screw-in connector)
Construction straight
Sealing form 1 Shape E
Sealing form 2 24° inner cone
Scope of supply Socket (without union nut and cutting ring)
Surface electro galvanised
Material Steel

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series Operating pressure Ø d2 mm G1 i mm Ø d3 mm L1 mm L2 mm L3 mm AF mm S1 S2
Product Name Series Operating pressure Ø d2 mm G1 i mm Ø d3 mm L1 mm L2 mm L3 mm AF mm S1 S2
GVR NW 04 HL 1/4 L PN 40 6 G 1/4" -19 12 19 40 21,0 18,0 19 12 14
GVR NW 06 HL L PN 40 8 G 1/4" -19 12 19 40 21,0 18,0 19 14 17
GVR NW 08 HL 3/8 L PN 40 10 G 3/8" -19 12 22 40 25,0 18,0 24 17 19
GVR NW 10 HL 1/2 L PN 40 12 G 1/2" -14 14 27 42 27,0 21,0 27 19 22
GVR NW 13 HL 3/4 L PN 40 15 G 3/4" -14 16 32 47 32,0 24,0 32 24 27
GVR NW 16 HL 1 L PN 40 18 G 1" -11 18 40 51 35,0 27,5 41 27 22
GVR NW 20 HL 1 L PN 40 22 G 1" -11 18 40 55 39,5 27,5 41 32 36
GVR NW 25 HL 11/4 L PN 40 28 G 1.1/4" -11 20 40 57 40,5 31,0 50 41 41
GVR NW 32 HL 11/2 L PN 40 35 G 1.1/2" -11 22 55 66 44,5 35,0 55 46 50
GVR NW 03 HS S PN 100 6 G 1/4" -19 12 19 38 23,0 18,0 19 14 17
GVR NW 04 HS S PN 100 8 G 1/4" -19 12 19 39 24,0 18,0 19 17 19
GVR NW 06 HS S PN 100 10 G 3/8" -19 12 22 43 26,5 18,0 24 19 22
GVR NW 08 HS 1/2 S PN 100 12 G 1/2" -14 14 27 45 28,5 21,0 27 22 24
GVR NW 13 HS 3/4 S PN 100 16 G 3/4" -14 16 32 52 33,5 24,0 32 27 30
GVR NW 16 HS 1 S PN 100 20 G 1" -11 18 40 60 38,0 27,5 41 32 36
GVR NW 20 HS S PN 100 25 G 1" -11 18 40 65 40,5 27,5 41 41 46
GVR NW 25 HS 11/4 S PN 100 30 G 1.1/4" -11 20 50 68 41,5 31,0 50 46 50
GVR NW 32 HS 11/2 S PN 100 38 G 1.1/2" -11 22 55 78 47,0 35,0 55 55 60
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure - Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.