GVR 90 ED VA

Rotary fitting, angle 90°, friction bearing

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSP external thread, cylindrical
Connection 2 metric cylindrical outer thread
Construction Angle 90°
Construction type Friction bearing
Design Rotary fitting (screw-in connector)
Material Stainless steel
Scope of supply Socket (without union nut and cutting ring)
Sealing form 1 Shape E
Sealing form 2 24° inner cone

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name i mm L1 mm L2 mm Operating pressure External pipe Ø mm S3 L3 mm AF mm G1 Series Ø d2 mm
Product Name i mm L1 mm L2 mm Operating pressure External pipe Ø mm S3 L3 mm AF mm G1 Series Ø d2 mm
GVR 90 NW 04 HL ED VA 8 47.0 26.5 PN 160 6 14 16.5 27 G 1/8" -28 L 6
GVR 90 NW 06 HL ED VA 12 47.5 26.5 PN 160 8 14 16.5 27 G 1/4" -19 L 8
GVR 90 NW 08 HL ED VA 12 47.5 26.5 PN 160 10 19 17.5 27 G 1/4" -19 L 10
GVR 90 NW 10 HL ED VA 12 47.5 26.5 PN 160 12 24 18.0 27 G 3/8" -19 L 12
GVR 90 NW 13 HL ED VA 14 58.5 33.5 PN 160 15 27 24.0 36 G 1/2" -14 L 15
GVR 90 NW 16 HL ED VA 14 58.5 33.5 PN 100 18 32 23.5 36 G 1/2" -14 L 18
GVR 90 NW 20 HL ED VA 16 66.0 38.0 PN 100 22 36 27.5 41 G 3/4" -14 L 22
GVR 90 NW 25 HL ED VA 18 72.0 42.5 PN 60 28 41 29.5 46 G 1" -11 L 28
GVR 90 NW 03 HS ED VA 8 47.5 26.5 PN 250 6 17 18.5 27 G 1/4" -19 S 6
GVR 90 NW 04 HS ED VA 8 47.5 26.5 PN 250 8 19 18.5 27 G 1/4" -19 S 8
GVR 90 NW 06 HS ED VA 12 47.5 26.5 PN 250 10 22 18.0 27 G 3/8" -19 S 10
GVR 90 NW 08 HS ED VA 12 47.5 26.5 PN 250 12 24 18.0 27 G 3/8" -19 S 12
GVR 90 NW 10 HS ED VA 14 58.5 33.5 PN 250 14 27 25.0 36 G 1/2" -14 S 14
GVR 90 NW 13 HS ED VA 14 58.5 33.5 PN 250 16 30 24.5 36 G 1/2" -14 S 16
GVR 90 NW 16 HS ED VA 16 66.0 38.0 PN 160 20 36 26.5 41 G 3/4" -14 S 20
GVR 90 NW 20 HS ED VA 18 72.0 42.5 PN 160 25 46 29.0 46 G 1" -11 S 25
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure
Ø d2 = External pipe diameter

Order hints

Seals of NBR
FPM (Viton) on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.