GVR 90 H

Rotary fitting, angle 90°, friction bearing



Properties

Connection 1 BSP external thread, cylindrical
Connection 2 metric cylindrical outer thread
Construction type Friction bearing
Design Rotary fitting (screw-in connector)
Construction Angle 90°
Sealing form 1 Shape E
Sealing form 2 24° inner cone
Scope of supply Socket (without union nut and cutting ring)
Surface electro galvanised
Material Steel

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series Operating pressure Ø d2 mm G1 G2 d3 mm i mm H mm L1 mm L2 mm L3 mm AF mm S1
Product Name Series Operating pressure Ø d2 mm G1 G2 d3 mm i mm H mm L1 mm L2 mm L3 mm AF mm S1
GVR 90 NW 04 HL H L PN 250 6 G 1/8" -28 M 12 x 1.5 14 8 7,0 40 21 23 27 17
GVR 90 NW 04 HL 1/4 H L PN 250 6 G 1/4" -19 M 12 x 1.5 19 12 7,0 41 22 23 27 19
GVR 90 NW 06 HL H L PN 250 8 G 1/4" -19 M 14 x 1.5 19 12 7,0 46 25 25 30 22
GVR 90 NW 08 HL H L PN 250 10 G 1/4" -19 M 16 x 1.5 19 12 7,0 46 25 26 30 22
GVR 90 NW 08 HL 3/8 H L PN 250 10 G 3/8" -19 M 16 x 1.5 22 12 7,0 48 27 27 32 24
GVR 90 NW 10 HL H L PN 250 12 G 3/8" -19 M 18 x 1.5 22 12 7,0 48 27 27 32 24
GVR 90 NW 10 HL 1/2 H L PN 250 12 G 1/2" -14 M 18 x 1.5 27 14 7,0 55 30 29 36 27
GVR 90 NW 13 HL H L PN 250 15 G 1/2" -14 M 22 x 1.5 27 14 7,0 59 33 32 40 32
GVR 90 NW 16 HL H L PN 160 18 G 1/2" -14 M 26 x 1.5 27 14 7,5 59 33 32 40 32
GVR 90 NW 16 HL 3/4 H L PN 160 18 G 3/4" -14 M 26 x 1.5 32 16 7,5 66 35 32 45 32
GVR 90 NW 20 HL H L PN 160 22 G 3/4" -14 M 30 x 2 32 16 7,5 66 35 36 45 36
GVR 90 NW 20 HL 1 H L PN 160 22 G 1" -11 M 30 x 2 40 18 7,5 78 41 36 55 36
GVR 90 NW 25 HL H L PN 100 28 G 1" -11 M 36 x 2 40 18 7,5 78 41 41 55 41
GVR 90 NW 32 HL 1 1/4 H L PN 100 35 G 1.1/4" -11 M 45 x 2 50 20 10,5 92 51 48 65 50
GVR 90 NW 40 HL H L PN 100 42 G 1.1/2" -11 M 52 x 2 55 22 11,0 102 56 53 75 55
GVR 90 NW 03 HS H S PN 400 6 G 1/4" -19 M 14 x 1.5 19 12 7,0 41 22 25 27 19
GVR 90 NW 04 HS H S PN 400 8 G 1/4" -19 M 16 x 1.5 19 12 7,0 41 22 25 27 19
GVR 90 NW 06 HS H S PN 400 10 G 3/8" -19 M 18 x 1.5 22 12 7,5 46 25 27 30 22
GVR 90 NW 06 HS 1/4 H S PN 400 10 G 1/4" -19 M 18 x 1.5 19 12 7,5 41 22 27 27 22
GVR 90 NW 08 HS H S PN 400 12 G 3/8" -19 M 20 x 1.5 22 12 7,5 48 27 28 32 24
GVR 90 NW 08 HS 1/2 H S PN 400 12 G 1/2" -14 M 20 x 1.5 27 14 7,5 55 30 27 36 24
GVR 90 NW 10 HS H S PN 400 14 G 1/2" -14 M 22 x 1.5 27 14 8,0 55 30 32 36 27
GVR 90 NW 13 HS H S PN 400 16 G 1/2" -14 M 24 x 1.5 27 14 8,5 59 33 34 40 32
GVR 90 NW 16 HS H S PN 250 20 G 3/4" -14 M 30 x 2 32 16 10,5 66 35 38 45 36
GVR 90 NW 20 HS 3/4 H S PN 250 25 G 3/4" -14 M 36 x 2 32 16 12,0 66 35 45 55 41
GVR 90 NW 20 HS H S PN 250 25 G 1" -11 M 36 x 2 40 18 12,0 78 41 45 55 41
GVR 90 NW 25 HS H S PN 250 30 G 1.1/4" -11 M 42 x 2 50 20 13,5 92 51 52 65 50
GVR 90 NW 32 HS H S PN 250 38 G 1.1/2" -11 M 52 x 2 55 22 16,0 102 56 59 75 55
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure - Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.