HD 100 T (1SN)

HD hose, high thermal resistance


Properties

Outer layer synthetic rubber with high temperature, ozone and weather resistance
Special features outstanding ozone, weather, UV and temperature resistance
Insert one high tensile steel wire braided insert
Application Hydraulics in mechanical engineering, Low and medium pressure circuits with extreme temperatures (e.g. foundries, compressors)
Colour blue
Inner layer oil resistant synthetic rubber
Elongation + 2 % to - 4 %
Media Air-oil vapour, Gear oil, Glycol and polyglycol, Mineral oil, Water-oil emulsion (0°C to +100°C)
Standard EN 853 1 SN

Hints

The change in length of the hose is determined at max. working pressure during testing to EN ISO 1402.
Operation with compressed air requires a perforated outer cover.

Article Table

Product Name DN* Size Inches Internal Ø min. mm Internal Ø max. mm Ø Insert min. mm Ø Insert max. mm External Ø max. mm Operating pressure bar Test pressure bar Burst pressure bar Min. bending radius mm
Product Name DN* Size Inches Internal Ø min. mm Internal Ø max. mm Ø Insert min. mm Ø Insert max. mm External Ø max. mm Operating pressure bar Test pressure bar Burst pressure bar Min. bending radius mm
HD 106 T 6 4 1/4" 6,2 7,0 10,6 11,6 14,1 225,0 450 900 100
HD 108 T 8 5 5/16" 7,7 8,5 12,1 13,3 15,7 215,0 430 850 115
HD 110 T 10 6 3/8" 9,3 10,1 14,5 15,7 18,1 180,0 360 720 130
HD 113 T 12 8 1/2" 12,3 13,5 17,5 19,1 21,4 160,0 320 640 180
HD 116 T 16 10 5/8" 15,5 16,7 20,6 22,2 24,5 130,0 260 520 200
HD 120 T 19 12 3/4" 18,6 19,8 24,6 26,2 28,5 105,0 210 420 240
HD 125 T 25 16 1" 25,0 26,4 32,5 34,1 36,6 88,0 175 350 300
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.