HD 200 RM (2SN)

HD hose, harsh conditions


Properties

Outer layer flame-retardant to MSHA, synthetic rubber with high ozone, abrasion, and weather resistance
Special features high ozone and abrasion resistance, weatherproof
Insert two high tensile steel wire braided inserts
Application Installations with high abrasion, medium high pressure range under extreme usage conditions, Mining and opencast mining, Shipbuilding
Colour black
Inner layer oil resistant synthetic rubber
Media Glycol, Mineral oil, Polyglycol based oil, Water (0°C to + 70°C), Water-oil emulsion (0°C to +100°C)
Standard EN 853 2 SN

Hints

The change in length of the hose is determined at max. working pressure during testing to EN ISO 1402.

Article Table

Product Name DN* Size Inches Internal Ø min. mm Internal Ø max. mm Ø Insert min. mm Ø Insert max. mm External Ø max. mm Operating pressure bar Test pressure bar Burst pressure bar Min. bending radius mm
Product Name DN* Size Inches Internal Ø min. mm Internal Ø max. mm Ø Insert min. mm Ø Insert max. mm External Ø max. mm Operating pressure bar Test pressure bar Burst pressure bar Min. bending radius mm
HD 206 RM 6 4 1/4" 6,2 7,0 12,1 13,3 15,7 400,0 800 1600 100
HD 208 RM 8 5 5/16" 7,7 8,5 13,7 14,9 17,3 350,0 700 1400 115
HD 210 RM 10 6 3/8" 9,3 10,1 16,1 17,3 19,7 330,0 660 1320 125
HD 213 RM 12 8 1/2" 12,3 13,5 19,0 20,6 23,0 275,0 550 1100 180
HD 216 RM 16 10 5/8" 15,5 16,7 22,2 23,8 26,2 250,0 500 1000 200
HD 220 RM 19 12 3/4" 18,6 19,8 26,2 27,8 30,1 215,0 430 850 240
HD 225 RM 25 16 1" 25,0 26,4 34,1 35,7 38,9 165,0 325 650 300
HD 232 RM 31 20 1.1/4" 31,4 33,0 43,3 45,7 49,5 125,0 250 500 420
HD 240 RM 38 24 1.1/2" 37,7 39,3 49,6 52,0 55,9 90,0 180 360 500
HD 250 RM 51 32 2" 50,4 52,0 62,3 64,7 68,6 80,0 160 320 630
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.