HD 200 S (2SN)

HD hose, harsh conditions


Properties

Outer layer oil resistant and weatherproof synthetic rubber
Insert two high tensile steel wire braided inserts
Application medium high pressure range under extreme usage conditions.
Colour black
Inner layer oil resistant synthetic rubber
Media Glycol, Mineral oil, Water (0°C to + 70°C), Water-oil emulsion (0°C to +100°C)
Standard exceeds EN 853 2SN

Hints

The change in length of the hose is determined at max. working pressure during testing to EN ISO 1402.

Article Table

Product Name DN* Size Inches Internal Ø mm External Ø mm Operating pressure bar Test pressure bar Burst pressure bar Min. bending radius mm
Product Name DN* Size Inches Internal Ø mm External Ø mm Operating pressure bar Test pressure bar Burst pressure bar Min. bending radius mm
HD 213 S 12 8 1/2" 12,7 22,0 380,0 760 1520 130
HD 216 S 16 10 5/8" 15,9 24,7 350,0 700 1400 180
HD 220 S 19 12 3/4" 19,0 29,3 310,0 620 1240 240
HD 225 S 25 16 1" 25,4 35,6 230,0 460 920 240
HD 232 S 31 20 1.1/4" 31,8 47,6 175,0 350 700 419
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.