HD 700 PRO

HD hose, extremely abrasion resistant outer cover


Properties

Outer layer synthetic rubber with additional plastic cover,, with more than 300 x the abrasion properties of standard outer covers
Special features extremely abrasion resistant top cover
Insert four (up to NW 25) or six (from NW 32) high tensile steel wire spirals
Application High pressure circuits with high loads, hydrostatic gearboxes, particularly suitable for restricted installation space and high abrasion, Shipbuilding
Colour black
Inner layer oil resistant synthetic rubber
Elongation + 2 % to - 2 %
Media Glycol, Mineral oil, Water (0°C to + 70°C), Water-oil emulsions
Standard DN 10 + 12: EN 856 4SP, DN 16: EN 856 4SH, from DN 19: SAE 100 R15

Hints

The change in length of the hose is determined at max. working pressure during testing to EN ISO 1402.

Article Table

Product Name DN* Size Inches Internal Ø mm External Ø mm Operating pressure bar Test pressure bar Burst pressure bar Min. bending radius mm
Product Name DN* Size Inches Internal Ø mm External Ø mm Operating pressure bar Test pressure bar Burst pressure bar Min. bending radius mm
HD 710 PRO 10 6 3/8" 9,5 21,4 445,0 890 1780 180
HD 713 PRO 12 8 1/2" 12,7 24,6 415,0 830 1660 230
HD 716 PRO 16 10 5/8" 16,2 29,2 420,0 840 1680 250
HD 720 PRO 19 12 3/4" 19,0 32,0 420,0 840 1680 265
HD 725 PRO 25 16 1" 25,4 38,2 420,0 840 1680 330
HD 732 PRO 31 20 1.1/4" 31,8 50,4 420,0 840 1680 445
HD 740 PRO 38 24 1.1/2" 38,1 57,3 420,0 840 1680 530
HD 750 PRO 51 32 2" 50,8 71,5 420,0 840 1680 700
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.