HD 800

HD hose


Properties

Outer layer synthetic rubber with high abrasion resistance
Special features narrow bending radius
Insert NW 16-25 four from NW 32 six high-tensile steel wire spiral inserts
Application Agricultural technology, Construction industry, hydrostatic drives, Mineral oil-based high pressure hydraulic systems
Colour black
Inner layer oil resistant synthetic rubber
Media Hydraulic oils (mineral oil base)
Standard DN 19 - DN 31 exceeds SAE 100 R15, DN16 exceeds EN 856 4SP
Approval MSHA IC-84/19, DIN5510
impulse test DN16, DN19 Qualified under laboratory conditions with 3 million bending cycles

Article Table

Product Name DN* Size Inches Internal Ø mm External Ø mm Operating pressure bar Test pressure bar Burst pressure bar Min. bending radius mm Weight / meter kg
Product Name DN* Size Inches Internal Ø mm External Ø mm Operating pressure bar Test pressure bar Burst pressure bar Min. bending radius mm Weight / meter kg
HD 816 16 10 5/8" 15,9 29,0 500,0 1000 2000 200 1,20
HD 820 19 12 3/4" 19,1 33,3 500,0 1000 2000 215 1,53
HD 825 25 16 1" 25,4 40,4 500,0 1000 2000 270 2,07
HD 832 31 20 1.1/4" 31,8 50,9 500,0 1000 2000 380 3,60
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.