HF (3000 PSI)

SAE flange half, flat



Properties

Construction type Flat
Design SAE flange half
Construction straight
Mounting Screw bore hole
Scope of supply flange only
Standard ISO 6162, SAE J 518 C
Surface electro galvanised
Material Steel C 60

Hints

Recommended screws are listed in the columns M (metr) and M (unc).

Article Table

Product Name PB 10.9 bar Size A mm B mm C mm D mm E mm F mm H mm I mm L mm M metr. M unc
Product Name PB 10.9 bar Size A mm B mm C mm D mm E mm F mm H mm I mm L mm M metr. M unc
HF 3001 350 1/2" 31,0 24,3 38,1 54 8,7 22,8 13 6,2 9 M 8 x 25 5/16" x 1.1/4"
HF 3002 350 3/4" 38,9 32,1 47,6 65 11,1 25,9 14 6,2 11 M 10 x 30 3/8" x 1.1/4"
HF 3003 315 1" 45,2 38,5 52,4 70 13,1 29,2 16 7,5 11 M 10 x 30 3/8" x 1.1/4"
HF 3004 250 1.1/4" 51,6 43,7 58,7 79 15,1 36,6 16 7,5 11 M 10 x 35 -
HF 3005 200 1.1/2" 61,1 50,8 69,9 94 17,9 41,1 16 7,5 13 M 12 x 35 1/2" x 1.1/2"
HF 3006 200 2" 72,2 62,7 77,8 102 21,4 48,2 16 9,0 13 M 12 x 35 1/2" x 1.1/2"
PN = Nominal pressure PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.