HFM KL / HFM KS

Measuring connection, M16 x 2 series



Properties

Connection 1 metric nut thread
Connection 2 Measuring connection M 16 x 2
Design Measuring connection with 24° sealing head (DKO)
Series light and heavy
Sealing form 1 24° outer cone with O-ring
Scope of supply with cap
Standard ISO 8434-1
Surface electro galvanised
Material Steel

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series External pipe Ø mm G1 Max. working pressure bar OR
Product Name Series External pipe Ø mm G1 Max. working pressure bar OR
HFM KL 06 L 6 M 12 x 1.5 315 4.0 x 1.5
HFM KL 08 L 8 M 14 x 1.5 315 6.0 x 1.5
HFM KL 10 L 10 M 16 x 1.5 315 7.5 x 1.5
HFM KL 12 L 12 M 18 x 1.5 315 9.0 x 1.5
HFM KL 15 L 15 M 22 x 1.5 315 12.0 x 2.0
HFM KL 18 L 18 M 26 x 1.5 315 15.0 x 2.0
HFM KL 22 L 22 M 30 x 2 160 16.3 x 2.4
HFM KL 28 L 28 M 36 x 2 160 26.0 x 2.0
HFM KL 35 L 35 M 45 x 2 160 32.0 x 2.5
HFM KL 42 L 42 M 52 x 2 160 38.0 x 2.5
HFM KS 06 S 6 M 14 x 1.5 630 6.0 x 1.5
HFM KS 08 S 8 M 16 x 1.5 630 7.5 x 1.5
HFM KS 10 S 10 M 18 x 1.5 630 9.0 x 1.5
HFM KS 12 S 12 M 20 x 1.5 630 9.0 x 1.5
HFM KS 14 S 14 M 22 x 1.5 630 12.0 x 2.0
HFM KS 16 S 16 M 24 x 1.5 400 12.0 x 2.0
HFM KS 20 S 20 M 30 x 2 400 16.3 x 2.4
HFM KS 25 S 25 M 36 x 2 400 26.0 x 2.0
HFM KS 30 S 30 M 42 x 2 400 25.3 x 2.4
HFM KS 38 S 38 M 52 x 2 315 38.0 x 2.5
Series: LL = Very light L = Light S = Heavy

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.