HFM KL VA / HFM KS VA

Measuring connection, M16 x 2 series



Properties

Connection 1 metric nut thread
Connection 2 Measuring connection M 16 x 2
Design Measuring connection with 24° sealing head (DKO)
Series light and heavy
Sealing form 1 24° outer cone with O-ring
Scope of supply with cap
Standard DIN 3865
Material Stainless steel

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series External pipe Ø mm G1 Max. working pressure bar OR
Product Name Series External pipe Ø mm G1 Max. working pressure bar OR
HFM KL 06 VA L 6 M 12 x 1.5 315 4.0 x 1.5
HFM KL 08 VA L 8 M 14 x 1.5 315 6.0 x 1.5
HFM KL 10 VA L 10 M 16 x 1.5 315 7.5 x 1.5
HFM KL 12 VA L 12 M 18 x 1.5 315 9.0 x 1.5
HFM KL 15 VA L 15 M 22 x 1.5 315 12.0 x 2.0
HFM KL 18 VA L 18 M 26 x 1.5 315 15.0 x 2.0
HFM KL 22 VA L 22 M 30 x 2 160 16.3 x 2.4
HFM KL 28 VA L 28 M 36 x 2 160 26.0 x 2.0
HFM KL 35 VA L 35 M 45 x 2 160 32.0 x 2.5
HFM KL 42 VA L 42 M 52 x 2 160 38.0 x 2.5
HFM KS 06 VA S 6 M 14 x 1.5 630 6.0 x 1.5
HFM KS 08 VA S 8 M 16 x 1.5 630 7.5 x 1.5
HFM KS 10 VA S 10 M 18 x 1.5 630 9.0 x 1.5
HFM KS 12 VA S 12 M 20 x 1.5 630 9.0 x 1.5
HFM KS 14 VA S 14 M 22 x 1.5 630 12.0 x 2.0
HFM KS 16 VA S 16 M 24 x 1.5 400 12.0 x 2.0
HFM KS 20 VA S 20 M 30 x 2 400 16.3 x 2.4
HFM KS 25 VA S 25 M 36 x 2 400 26.0 x 2.0
HFM KS 30 VA S 30 M 42 x 2 400 25.3 x 2.4
HFM KS 38 VA S 38 M 52 x 2 315 38.0 x 2.5
Series: LL = Very light L = Light S = Heavy

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.