HFM MK ST

Measuring hose line

  • Image_1 Image_1

Properties

Application area Measuring equipment
Design Hose line DN 2 with plug-in measuring connections
Inner layer Polyamid (PA)
Insert one aramide braided insert
Media Liquids based on mineral oil and glycol
Outer layer Polyurethane (PUR)
Scope of supply with dust protection
Temp. max. 100 °C
Temp. min. -20 °C

Article Table

Product Name External Ø nom. mm Length mm Internal Ø mm Max. working pressure bar Min. bending radius mm
Product Name External Ø nom. mm Length mm Internal Ø mm Max. working pressure bar Min. bending radius mm
HFM MK 300 S 5.5 300 2 400 35
HFM MK 400 S 5.5 400 2 400 35
HFM MK 630 S 5.5 630 2 400 35
HFM MK 800 S 5.5 800 2 400 35
HFM MK 1000 S 5.5 1000 2 400 35
HFM MK 1500 S 5.5 1500 2 400 35
HFM MK 2000 S 5.5 2000 2 400 35
HFM MK 2500 S 5.5 2500 2 400 35
HFM MK 3200 S 5.5 3200 2 400 35
HFM MK 4000 S 5.5 4000 2 400 35

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.