HFM SKE VA

Measuring hose line

  • Image_1 Image_1

Properties

Application area Measuring equipment
Design Hose line DN 2 with M 16 x 2 measuring connections
Inner layer Polyamid (PA)
Insert one aramide braided insert
Media Liquids based on mineral oil and glycol
Outer layer Polyurethane (PUR)
Scope of supply with dust protection
Temp. max. 100 °C
Temp. min. -20 °C

Hints

The connections are stainless steel.

Article Table

Product Name External Ø nom. mm Length mm Internal Ø mm Max. working pressure bar Min. bending radius mm
Product Name External Ø nom. mm Length mm Internal Ø mm Max. working pressure bar Min. bending radius mm
HFM SKE 200 VA 5.5 200 2 630 35
HFM SKE 300 VA 5.5 300 2 630 35
HFM SKE 400 VA 5.5 400 2 630 35
HFM SKE 630 VA 5.5 630 2 630 35
HFM SKE 800 VA 5.5 800 2 630 35
HFM SKE 1000 VA 5.5 1000 2 630 35
HFM SKE 1500 VA 5.5 1500 2 630 35
HFM SKE 2000 VA 5.5 2000 2 630 35
HFM SKE 2500 VA 5.5 2500 2 630 35
HFM SKE 3200 VA 5.5 3200 2 630 35
HFM SKE 4000 VA 5.5 4000 2 630 35

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.