HK 2P 2 FSRA

Gear pump, size 2 FSRA

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Design Housing Type HY (mounting top left, bottom right)
Material Housing: Aluminium
Front flange, end cover: Aluminium
Pitch circle pressure side 35 / M6
Pitch circle suction side 40 / M6

Description

German standard pump – hole pattern 60 x 60 – dia. 50 – taper 1:5 – flange fitting

Article Table

Product Name Direction of rotation p1max. bar VFU cm³ A mm Speed max. r/min p3max. bar B mm Speed min. r/min Weight kg p2max. bar
Product Name Direction of rotation p1max. bar VFU cm³ A mm Speed max. r/min p3max. bar B mm Speed min. r/min Weight kg p2max. bar
HK 2P 41 21 FSRA anti-clockwise rotating 260 4.2 87.2 3500 300 38.6 700 2.10 280
HK 2P 41 22 FSRA clockwise rotating 260 4.2 87.2 3500 300 38.6 700 2.10 280
HK 2P 43 21 FSRA anti-clockwise rotating 260 6.0 90.2 3500 300 38.6 700 2.20 280
HK 2P 43 22 FSRA clockwise rotating 260 6.0 90.2 3500 300 38.6 700 2.20 280
HK 2P 45 21 FSRA anti-clockwise rotating 260 8.4 94.2 3500 300 40.6 700 2.30 280
HK 2P 45 22 FSRA clockwise rotating 260 8.4 94.2 3500 300 40.6 700 2.30 280
HK 2P 47 21 FSRA anti-clockwise rotating 260 10.8 98.2 3500 300 45.0 700 2.40 280
HK 2P 47 22 FSRA clockwise rotating 260 10.8 98.2 3500 300 45.0 700 2.40 280
HK 2P 49 21 FSRA anti-clockwise rotating 250 14.4 104.2 3500 290 45.0 700 2.60 270
HK 2P 49 22 FSRA clockwise rotating 250 14.4 104.2 3500 290 45.0 700 2.60 270
HK 2P 51 21 FSRA anti-clockwise rotating 230 16.8 108.2 3500 270 45.0 700 2.70 250
HK 2P 51 22 FSRA clockwise rotating 230 16.8 108.2 3500 270 45.0 700 2.70 250
HK 2P 53 21 FSRA anti-clockwise rotating 210 19.2 112.5 3000 250 45.0 700 2.80 230
HK 2P 53 22 FSRA clockwise rotating 210 19.2 112.5 3000 250 45.0 700 2.80 230
HK 2P 55 21 FSRA anti-clockwise rotating 200 22.8 118.2 3000 240 52.5 700 2.95 220
HK 2P 55 22 FSRA clockwise rotating 200 22.8 118.2 3000 240 52.5 700 2.95 220
VFU = conveying volume per revolution
p1 = continuous pressure
p2 = working pressure
p3 = maximum pressure

Order hints

Further pump versions available on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.