HK 2P 4 FSRA

Gear pump, size 2 FSRA

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Material Housing: Aluminium
Front flange, end cover: Aluminium
Pitch circle pressure side 35 / M6
Pitch circle suction side 40 / M6

Description

German standard pump – hole pattern 100 x 72 – dia. 80 – taper 1:5 – flange fitting

Article Table

Product Name Direction of rotation p1max. bar VFU cm³ A mm Speed max. r/min p3max. bar B mm Speed min. r/min Weight kg p2max. bar
Product Name Direction of rotation p1max. bar VFU cm³ A mm Speed max. r/min p3max. bar B mm Speed min. r/min Weight kg p2max. bar
HK 2P 41 41 FSRA anti-clockwise rotating 260 4.2 87.2 3500 300 47.1 700 2.33 280
HK 2P 41 42 FSRA clockwise rotating 260 4.2 87.2 3500 300 47.1 700 2.33 280
HK 2P 43 41 FSRA anti-clockwise rotating 260 6.0 90.2 3500 300 41.1 700 2.43 280
HK 2P 43 42 FSRA clockwise rotating 260 6.0 90.2 3500 300 41.1 700 2.43 280
HK 2P 45 41 FSRA anti-clockwise rotating 260 8.4 94.2 3500 300 51.5 700 2.53 280
HK 2P 45 42 FSRA clockwise rotating 260 8.4 94.2 3500 300 51.5 700 2.53 280
HK 2P 47 41 FSRA anti-clockwise rotating 260 10.8 98.2 3500 300 47.5 700 2.63 280
HK 2P 47 42 FSRA clockwise rotating 260 10.8 98.2 3500 300 47.5 700 2.63 280
HK 2P 49 41 FSRA anti-clockwise rotating 250 14.4 104.2 3500 290 47.5 700 2.73 270
HK 2P 49 42 FSRA clockwise rotating 250 14.4 104.2 3500 290 47.5 700 2.73 270
HK 2P 51 41 FSRA anti-clockwise rotating 230 16.8 108.2 3500 270 47.5 700 2.83 250
HK 2P 51 42 FSRA clockwise rotating 230 16.8 108.2 3500 270 47.5 700 2.83 250
HK 2P 53 41 FSRA anti-clockwise rotating 210 19.2 112.2 3000 250 47.5 700 2.93 230
HK 2P 53 42 FSRA clockwise rotating 210 19.2 112.2 3000 250 47.5 700 2.93 230
HK 2P 55 41 FSRA anti-clockwise rotating 200 22.8 118.2 3000 240 55.0 700 3.18 220
HK 2P 55 42 FSRA clockwise rotating 200 22.8 118.2 3000 240 55.0 700 3.18 220
HK 2P 57 41 FSRA anti-clockwise rotating 170 26.2 124.7 3000 210 55.0 700 3.28 190
HK 2P 57 42 FSRA clockwise rotating 170 26.2 124.7 3000 210 55.0 700 3.28 190
VFU = conveying volume per revolution
p1 = continuous pressure
p2 = working pressure
p3 = maximum pressure

Order hints

Further pump versions available on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.