HK 92RD 02 BG2

Gear flow divider, size 2 92RD 2-way

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Design without central phase compensation valves, internal leak oil discharge
Pressure difference max. 30 bar (between the sections)
Recommended speed 1800 - 2000 rpm
Rotational speed range 1200 - 2500 U/min

Description

This flow divider is used to supply four independent hydraulic circuits with just one pump
Division error approx. 3%
This flow divider is used to supply two independent hydraulic circuits with just one pump
Configuration of gear flow dividers: qi = Q/z * 1000/n
qi = displacement/section [cm3]; Q = total intake volumetric flow [l/min]; z = no. of sections; n = rotating speed [rpm]

Hints

Vor Inbetriebnahme in der Anlage sollte das erste Einlaufen der Zahnradmengenteiler ohne Belastung erfolgen.

Article Table

Product Name p1 max. bar Gewicht kg A mm Durchfluss pro Element typ. l/min Eingangsvolumen je Sektion cm³ Li mm Durchfluss pro Element max. l/min Durchfluss pro Element min. l/min p2 max. bar
Product Name p1 max. bar Gewicht kg A mm Durchfluss pro Element typ. l/min Eingangsvolumen je Sektion cm³ Li mm Durchfluss pro Element max. l/min Durchfluss pro Element min. l/min p2 max. bar
HK92RD0243 210 bar 5.0 kg 50 mm 10.80 l/min 6.00 cm³ 224 mm 15.00 l/min 7.20 l/min 260 bar
HK92RD0245 210 bar 5.3 kg 54 mm 15.10 l/min 9.00 cm³ 232 mm 22.50 l/min 10.80 l/min 260 bar
HK92RD0247 210 bar 5.5 kg 58 mm 19.40 l/min 11.00 cm³ 240 mm 27.50 l/min 13.20 l/min 260 bar
HK92RD0249 200 bar 5.7 kg 64 mm 25.90 l/min 14.00 cm³ 252 mm 35.00 l/min 16.80 l/min 230 bar
p1 = max. working pressure, p2 = max. peak pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.