HK 92RD 04 BG2

Gear flow divider, size 2 92RD 4-way

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Design without central phase compensation valves
internal leak oil discharge
Pressure difference max. 30 bar (between the sections)
Recommended speed 1800 - 2000 rpm
Rotational speed range 1200 - 2500 U/min

Description

This flow divider is used to supply four independent hydraulic circuits with just one pump
Division error approx. 3%
This flow divider is used to supply two independent hydraulic circuits with just one pump
Configuration of gear flow dividers: qi = Q/z * 1000/n
qi = displacement/section [cm3]; Q = total intake volumetric flow [l/min]; z = no. of sections; n = rotating speed [rpm]

Hints

Before commissioning the system, the first running-in of the gear flow divider should be under no load.
Diagrams and circuit diagrams essentially valid as schematic diagrams also for 4-way flow dividers.

Article Table

Product Name p1max. bar Weight kg A mm Flow per element typ. l/min Intake volume per section cm³ Li mm Flow per element max. l/min Flow per element min. l/min p2max. bar
Product Name p1max. bar Weight kg A mm Flow per element typ. l/min Intake volume per section cm³ Li mm Flow per element max. l/min Flow per element min. l/min p2max. bar
HK 92RD 04 41 210 9.5 47 7.60 4.00 400 10.00 4.80 260
HK 92RD 04 43 210 9.9 50 10.80 6.00 412 15.00 7.20 260
HK 92RD 04 45 210 10.3 54 15.10 9.00 428 22.50 10.80 260
HK 92RD 04 47 210 10.8 58 19.40 11.00 444 27.50 13.20 260
HK 92RD 04 49 200 11.5 64 25.90 14.00 468 35.00 16.80 230
p1 = max. working pressure
p2 = max. peak pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.