HK 9RV 02 BG1

Gear flow divider, size 1 9RV 2-way

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Design with one phase compensation valve and anti-cavitation valve per section, Adjustment range DBV: 7-210 bar, external leak oil discharge
Online-Shop https://shop.hansa-flex.com/de/HK9RV02BG1
Pressure difference max. 30 bar (between the sections)
Recommended speed 1800 - 2000 rpm
Rotational speed range 1200 - 2700 U/min

Description

This flow divider is used to supply two independent hydraulic circuits with just one pump
Division error approx. 3%
Different pressure settings for each section possible
Valves settable from 70-210 bar
other setting ranges on request
Modification to internal leak oil discharge possible - For this
close off port T with G1/2" blind plug (modification recommended only after consultation!)
Configuration of gear flow dividers: qi = Q/z * 1000/n
qi = displacement/section [cm3]; Q = total intake volumetric flow [l/min]; z = no. of sections; n = rotating speed [rpm]

Hints

Vor Inbetriebnahme in der Anlage sollte das erste Einlaufen der Zahnradmengenteiler ohne Belastung erfolgen.

Article Table

Product Name p1 max. bar A mm Durchfluss pro Element typ. l/min Eingangsvolumen je Sektion cm³ Gewicht kg Li mm Durchfluss pro Element max. l/min Durchfluss pro Element min. l/min p2 max. bar
Product Name p1 max. bar A mm Durchfluss pro Element typ. l/min Eingangsvolumen je Sektion cm³ Gewicht kg Li mm Durchfluss pro Element max. l/min Durchfluss pro Element min. l/min p2 max. bar
HK9RV02A18 220 bar 44 mm 4.00 l/min 1.70 cm³ 2.25 kg 228 mm 9.50 l/min 2.00 l/min 270 bar
HK9RV02A20 220 bar 46 mm 5.00 l/min 2.20 cm³ 2.30 kg 232 mm 13.00 l/min 2.50 l/min 270 bar
HK9RV02A21 220 bar 48 mm 6.00 l/min 2.60 cm³ 2.35 kg 236 mm 16.00 l/min 3.00 l/min 270 bar
HK9RV02A23 220 bar 50 mm 7.00 l/min 3.20 cm³ 2.45 kg 240 mm 19.00 l/min 3.50 l/min 270 bar
HK9RV02A25 200 bar 52 mm 8.00 l/min 3.80 cm³ 2.55 kg 244 mm 22.50 l/min 4.50 l/min 240 bar
p1 = max. working pressure, p2 = max. peak pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.