HK ADRL

ADRL non-return valve



Properties

Design Cone locking, pilot-controlled - single-acting
Material Steel
Operating pressure max. 400 bar

Article Table

Product Name p max. bar Opening pressure bar Level control ratio Q max. L/min A mm B mm C mm D mm E F mm G mm Weight kg
Product Name p max. bar Opening pressure bar Level control ratio Q max. L/min A mm B mm C mm D mm E F mm G mm Weight kg
HK ADRL 10 400 0,5 1:2.8 30 41 120 30,0 14,0 G 3/8” 12 40,0 1,0
HK ADRL 15 350 0,5 1:2.7 60 50 145 33,0 16,0 G 1/2” 16 49,0 2,0
HK ADRL 20 350 0,5 1:2.5 100 55 175 42,5 18,5 G 3/4” 19 54,5 2,5
HK ADRL 32 350 0,5 1:2.3 300 90 245 53,0 23,5 G 1.1/4” 25 87,5 7,0

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.