HK B3/B14 230/400V IE2

Electric motor B3/B14 230/400V IE2



Properties

Design feet removable, type B3/B14
Material Housing: Aluminium, painted
Protection IP IP 55
Ambient temperature -20 °C to +40 °C

Description

Self-cooling squirrel-cage energy-saving motors
High efficiency IE2 - IEC60034-30:2008
Rated voltage 230/400V 50Hz, 460V 60Hz; 4-pin
Voltage tolerance +- 5%

Hints

The transition period for harmonization of mains voltage with increased tolerances within the EU has expired. For that reason specification of the voltage range for electric motors on type plates according to IE2 is no longer applicable. The rated voltage is specified instead.

Article Table

Product Name n 50 Hz rpm P 50 Hz kW I 50 Hz A LF 50 Hz H mm A mm B mm C mm Ø D shaft mm Ø E mm Ø F mm η (IE2) % Weight kg
Product Name n 50 Hz rpm P 50 Hz kW I 50 Hz A LF 50 Hz H mm A mm B mm C mm Ø D shaft mm Ø E mm Ø F mm η (IE2) % Weight kg
HK K 405A 80B4 IE2 1430 0,75 1,90 0,71 80 125 250 209 19 80 120 79,6 11,9
HK K 406A 90SA4 IE2 1420 1,10 2,50 0,77 90 140 275 230 24 95 140 81,4 14,9
HK K 407A 90LB4 IE2 1430 1,50 3,40 0,76 90 140 300 230 24 95 140 82,8 17,0
HK K 408A 100LA4 IE2 1440 2,20 4,70 0,79 100 160 338 256 28 110 160 84,3 27,2
HK K 409A 100LB4 IE2 1440 3,00 6,50 0,77 100 160 338 256 28 110 160 85,5 26,5
n 50 Hz = nominal speed at 400 V/50 Hz - I 50 Hz = nominal current at 400 V/50 Hz - LF 50 Hz = cos phi power factor at 50 Hz - η (IE2) = efficiency to IE2 in % (at full load) - P 50 Hz = nominal output at 400 V/50 Hz

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.