HK B3/B5 230/400V IE2

Electric motor B3/B5 230/400V IE2



Properties

Design feet removable, type B3/B5
Material Housing: Aluminium
Protection IP IP 55
Ambient temperature -20 °C to +40 °C

Description

Self-cooling squirrel-cage energy-saving motors
High efficiency IE2 - IEC60034-30:2008
Rated voltage 230/400V 50Hz, 460V 60Hz; 4-pin
Voltage tolerance +- 5%

Hints

The transition period for harmonization of mains voltage with increased tolerances within the EU has expired. For that reason specification of the voltage range for electric motors on type plates according to IE2 is no longer applicable. The rated voltage is specified instead.

Article Table

Product Name n 50 Hz rpm n 60 Hz rpm P 50 Hz kW P 60 Hz kW I 50 Hz A LF 50 Hz A mm H mm B mm C mm Ø D shaft mm Ø E mm Ø F mm η (IE2) % Weight kg
Product Name n 50 Hz rpm n 60 Hz rpm P 50 Hz kW P 60 Hz kW I 50 Hz A LF 50 Hz A mm H mm B mm C mm Ø D shaft mm Ø E mm Ø F mm η (IE2) % Weight kg
HK 80M4 B35 2-4 IE2 1400 1700 0,75 0,86 1,81 0,75 125 80 260 220 19 130 200 79,6 12,3
HK 90S4 B35 2-4 IE2 1440 1740 1,10 1,30 2,50 0,77 140 90 280 250 24 130 200 81,4 15,0
HK 90L4 B35 2-4 IE2 1440 1740 1,50 1,75 3,40 0,77 140 90 310 250 24 130 200 82,8 18,0
HK 100LA4 B35 2-4 IE2 1455 1755 2,20 2,55 4,65 0,81 160 100 340 272 28 215 250 84,3 21,0
HK 100LB4 B35 2-4 IE2 1455 1755 3,00 3,45 6,20 0,82 160 100 340 272 28 215 250 85,5 25,0
P 60 Hz = nominal output at 400 V/60 Hz - n 50 Hz = nominal speed at 400 V/50 Hz - n 60 Hz = nominal speed at 400 V/60 Hz - I 50 Hz = nominal current at 400 V/50 Hz - LF 50 Hz = cos phi power factor at 50 Hz - η (IE2) = efficiency to IE2 in % (at full load) - P 50 Hz = nominal output at 400 V/50 Hz

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.