HK B5 400/690V IE2

Electric motor B5 400/690V IE2



Properties

Design type B5, without feet
Material Housing: Aluminium, Housing: Grey cast iron (from HK160M4B354-6IE2)
Protection IP IP 55
Ambient temperature -20 °C to +40 °C

Description

Self-cooling squirrel-cage energy-saving motors
High efficiency IE2 - IEC60034-30:2008
Rated voltage 400/690V 50Hz, 460V 60Hz; 4-pin
Voltage tolerance +- 5%
Above 11 kW incl. temperature protection (PTC thermistor)

Hints

The transition period for harmonization of mains voltage with increased tolerances within the EU has expired. For that reason specification of the voltage range for electric motors on type plates according to IE2 is no longer applicable. The rated voltage is specified instead.

Article Table

Product Name n 50 Hz rpm n 60 Hz rpm P 50 Hz kW P 60 Hz kW I 50 Hz A LF 50 Hz H1 mm B mm Ø D shaft mm Ø E mm Ø F mm η (IE2) % Weight kg
Product Name n 50 Hz rpm n 60 Hz rpm P 50 Hz kW P 60 Hz kW I 50 Hz A LF 50 Hz H1 mm B mm Ø D shaft mm Ø E mm Ø F mm η (IE2) % Weight kg
HK 112M4 B5 4-6 IE2 1460 1760 4,00 4,60 8,20 0,81 177 375 28 180 250 85,5 29,0
HK 132SB4 B5 4-6 IE2 1460 1760 5,50 6,30 11,20 0,80 202 390 38 230 300 87,7 42,0
P 60 Hz = nominal output at 400 V/60 Hz - n 50 Hz = nominal speed at 400 V/50 Hz - n 60 Hz = nominal speed at 400 V/60 Hz - I 50 Hz = nominal current at 400 V/50 Hz - LF 50 Hz = cos phi power factor at 50 Hz - η (IE2) = efficiency to IE2 in % (at full load) - P 50 Hz = nominal output at 400 V/50 Hz

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.