HK BAK RA

BAKRA hydraulic tank

  • Image_1 Image_1
  • Image_2 Image_2
  • Image_3 Image_3

Properties

Material Aluminium
Scope of supply without steel cover and cover gasket

Description

Sturdy cast aluminium body (GD-AlSi9Cu3 / EN AC-46500)
Continuous groove for O-ring or flat gasket for the cover
Low weight
Good heat transmission due to high thermal conductivity coefficient
Floor with incline on all sides towards the oil drain (in accordance with VDI Directive 3230)

Article Table

Product Name E mm Weight kg Cooling capacity kW A mm H mm D G C mm Useful volume V [I] l F mm B mm
Product Name E mm Weight kg Cooling capacity kW A mm H mm D G C mm Useful volume V [I] l F mm B mm
HK BAK RA 03 160 1.4 0.16 220 120 G 1/4” 4x M6x8 165.0 3 105.0 150
HK BAK RA 06 220 1.7 0.36 260 150 G 3/8” 4x M6x8 200.0 6 160.0 180
HK BAK RA 12 240 2.3 0.60 310 165 G 3/8” 4x M8x12 225.0 10 155.0 215
HK BAK RA 20 288 4.3 0.72 366 165 G 1/2” 4x M8x12 270.0 17 192.0 245
HK BAK RA 30 340 5.0 0.92 490 134 G 1/2” 4x M10x10 326.0 27 176.0 275
HK BAK RA 44 415 7.0 1.04 515 244 G 1/2” 4x M10x14 341.0 40 241.0 305
HK BAK RA 70 465 7.0 1.16 605 294 G 1/2” 4x M10x14 422.5 63 282.5 355
HK BAK RA 130 597 25.0 2.10 757 285 G 1/2” 4x M10x14 557.0 123 397.0 396
Weight: (without cover) kg
Cooling capacity* P [kW] (Δ t = 40 K): Cooling capacity depending on the ambient conditions
Dimension H: Assembly surface for fill level indicator

Order hints

Baffle plates are optionally available for HK BAK RA 130.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.