HK BM150

Hand-operated directional control valve BM 150


Properties

Connection P + T = G 3/4"; P2 + T2 = G 1"; A + B = G 3/4"
Design Monobloc valve for pipeline installation
Scope of supply without hand lever (please order separately)
Operating pressure P, A, B: max. 220bar / T: max. 80bar
Volumetric flow max. 150 l/min (note characteristic curves)

Description

compact design
Integrated non-return valve and pressure relief valve 90-220bar (valve must be set)
spool with control notches for sensitive operation
only possible with 1 section

Article Table

Product Name Design Weight kg
Product Name Design Weight kg
HK BM150 A1 1 Section (A1) 8,2
For information about actuators and piston types see additional datasheet

Order hints

Please order hand lever separately - 1 lever per section!
The valves are available in the stated basic version. For other possible configurations for actuators and piston types see graphic.
Example configuration HKBM150A1:
- Valve type HKBM150
- Section 1 with piston type A and actuator 1

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.