Pressure transmission for hand-operated directional control valve BM

  • Image_1 Image_1
  • Image_2 Image_2


Material Steel
Scope of supply with O-ring


The pressure transmission is suitable for linking monobloc valves type HK BM together. In this situation, the pressure transmission on valve 1 is screwed into the oil port T2. The return flow to the tank on valve 1 must be connected to the top port T1. If valve 1 is not actuated, another function can be controlled at full pressure and volume flow using valve 2. If valve 1 is actuated, then no pressure is available at valve 2.

Article Table

Product Name for valve type Weight kg
Product Name for valve type Weight kg
HK BM40 C0 HK BM40 0.10
HK BM70 C0 HK BM70 0.10
HK BM150 C0 HK BM150 0.15


Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.