HK CBD ZLBA

Gear pump, size 1 CBD

  • Image_1 Image_1
  • Image_2 Image_2
  • Image_3 Image_3

Properties

Cover connection, suction side G 3/8”
Design Economy variant
housing type BH (attachment top right-hand, bottom left-hand)
Flange connection, pressure side Ø 9.25
Material Housing: Aluminium
Front flange, end cover: Aluminium

Description

European standard pump – hole pattern 40 x 40 – dia. 32 – taper 1:8

Article Table

Product Name Direction of rotation p1max. bar VFU cm³ A mm Speed max. r/min p3max. bar Speed min. r/min Weight kg p2max. bar
Product Name Direction of rotation p1max. bar VFU cm³ A mm Speed max. r/min p3max. bar Speed min. r/min Weight kg p2max. bar
HK CBD F211 L1Z LBA anti-clockwise rotating 200 1.1 74 6000 250 600 0.77 220
HK CBD F216 L1Z LBA anti-clockwise rotating 200 1.6 76 6000 250 600 0.80 220
HK CBD F221 L1Z LBA anti-clockwise rotating 200 2.1 78 6000 250 600 0.82 220
HK CBD F227 L1Z LBA anti-clockwise rotating 200 2.7 80 6000 250 600 0.85 220
HK CBD F232 L1Z LBA anti-clockwise rotating 200 3.2 82 5000 250 600 0.87 220
HK CBD F237 L1Z LBA anti-clockwise rotating 200 3.7 84 4500 250 600 0.90 220
HK CBD F242 L1Z LBA anti-clockwise rotating 200 4.2 86 4000 250 600 0.92 220
HK CBD F258 L1Z LBA anti-clockwise rotating 160 5.8 92 2900 200 600 1.00 180
HK CBD F280 L1Z LBA anti-clockwise rotating 160 8.0 100 2100 200 600 1.10 180
VFU = conveying volume per revolution
p1 = continuous pressure
p2 = working pressure
p3 = maximum pressure

Order hints

Further pump versions available on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.