HK CF 00

Cylinder base

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Material Steel S355J0 (Fe510C)

Hints

These cylinder bases may bulge under pressure peaks. Weld on attachments to strengthen the bases. Use thicker cylinder bases (e.g. HK CFPM) for use in conditions with major pressure fluctuations or high operating cycles.

Article Table

Product Name S1 mm Ø AL mm Ø T mm Weight kg S mm
Product Name S1 mm Ø AL mm Ø T mm Weight kg S mm
HK CF 00 025 035 2 25 35 0.05 7
HK CF 00 030 040 2 30 40 0.06 8
HK CF 00 032 042 2 32 42 0.95 10
HK CF 00 035 045 2 35 45 0.10 10
HK CF 00 040 050 2 40 50 0.13 10
HK CF 00 045 055 2 45 55 0.16 10
HK CF 00 050 060 2 50 60 0.19 10
HK CF 00 055 065 2 55 65 0.28 12
HK CF 00 060 070 2 60 70 0.33 12
HK CF 00 063 073 2 63 73 0.35 12
HK CF 00 065 075 2 65 75 0.38 12
HK CF 00 065 080 2 65 80 0.40 12
HK CF 00 070 080 2 70 80 0.43 12
HK CF 00 070 085 2 70 85 0.45 12
HK CF 00 075 090 2 75 90 0.53 12
HK CF 00 080 090 2 80 90 0.55 12
HK CF 00 080 095 2 80 95 0.58 12
HK CF 00 085 100 2 85 100 0.77 15
HK CF 00 090 105 2 90 105 0.86 15
HK CF 00 100 115 2 100 115 1.05 15
HK CF 00 110 125 2 110 125 1.34 15
HK CF 00 110 130 2 110 130 1.40 15
HK CF 00 120 140 2 120 140 2.00 18
HK CF 00 125 145 2 125 145 2.11 18
HK CF 00 140 160 2 140 160 2.67 18
HK CF 00 150 170 2 150 170 3.33 20
HK CF 00 160 180 2 160 180 3.79 20

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.