HK CFP

Yoke end, long

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Material Steel S355J0 (Fe510C)

Article Table

Product Name A mm H mm G mm Gewicht kg Profil Ø D mm B mm C mm E mm
Product Name A mm H mm G mm Gewicht kg Profil Ø D mm B mm C mm E mm
HKCFP4010125 125.00 mm 105.0 mm 20.50 mm 0.5 kg 40 x 10 20.25 mm 95.00 mm 20.0 mm 40.50 mm
HKCFP4510067 67.00 mm 40.0 mm 23.00 mm 1.0 kg 45 x 10 20.25 mm 30.00 mm 27.0 mm 43.00 mm
HKCFP4510132 132.00 mm 107.0 mm 28.00 mm 1.0 kg 45 x 10 22.25 mm 97.00 mm 25.0 mm 48.00 mm
HKCFP5015135 135.00 mm 110.0 mm 22.00 mm 1.3 kg 50 x 15 26.25 mm 95.00 mm 25.0 mm 52.00 mm
HKCFP5015140 140.00 mm 110.0 mm 33.00 mm 1.5 kg 50 x 15 26.25 mm 95.00 mm 30.0 mm 63.00 mm
HKCFP6020175 175.00 mm 145.0 mm 35.00 mm 3.0 kg 60 x 20 26.25 mm 125.00 mm 30.0 mm 75.00 mm
HKCFP6020180 180.00 mm 150.0 mm 40.00 mm 3.5 kg 60 x 20 26.25 mm 130.00 mm 30.0 mm 80.00 mm

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.