HK CPB

CPB swivel pin

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Material Steel S355J0 (Fe510C)

Hints

Tolerance ØE <= 100: +0.2; Tolerance ØE > 100: +0.4

Article Table

Product Name C mm A mm G mm Ø E mm Ø D mm F mm Weight kg B mm
Product Name C mm A mm G mm Ø E mm Ø D mm F mm Weight kg B mm
HK CPB 035 1515 80 50 20 35 15 45 0.17 15
HK CPB 040 1515 80 50 20 40 15 50 0.16 15
HK CPB 042 2020 95 55 25 42 20 55 0.31 20
HK CPB 045 2020 100 60 25 45 20 60 0.36 20
HK CPB 010 0000 110 70 30 50 20 65 0.52 20
HK CPB 055 2020 115 75 30 55 20 70 0.52 20
HK CPB 020 0000 130 80 35 60 25 75 0.79 25
HK CPB 065 2525 140 90 35 65 25 85 0.95 25
HK CPB 030 0000 160 100 45 70 30 90 1.57 30
HK CPB 073 3030 160 100 45 73 30 95 1.60 30
HK CPB 075 3030 160 100 45 75 30 95 1.51 30
HK CPB 040 0000 180 110 50 80 35 100 2.35 35
HK CPB 090 3535 185 115 50 90 35 115 2.21 35
HK CPB 050 0000 195 115 55 92 40 115 2.60 40
HK CPB 050 1000 195 115 55 95 40 115 2.40 40
HK CPB 100 4040 200 120 55 100 40 120 2.46 40
HK CPB 055 0000 215 125 60 105 45 125 3.00 45
HK CPB 060 0000 245 145 70 115 50 145 5.30 50
HK CPB 125 5050 260 160 70 125 50 160 5.60 50
HK CPB 080 0000 290 170 80 140 60 170 7.70 60
HK CPB 145 6060 300 180 80 145 60 180 8.60 60
HK CPB 160 6060 320 200 100 160 60 200 12.80 60
HK CPB 170 7060 330 210 100 170 70 205 13.50 60
HK CPB 180 8060 350 230 105 180 80 225 18.30 60

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.