HK CSTS C

Pivot yoke with regreasable bearings

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Industry
Material Steel ST 52.3
Standard DIN 648, E SERIES, TYPE C

Hints

HKCSTS012C00 cannot be re-lubricated
HKCSTS015C00, HKCSTS016C00, HKCSTS017C00 can only be lubricated by a lubrication hole (no grease nipple)

Article Table

Product Name allowable dyn. load kN L mm S1 mm d1 mm d mm d2 mm S mm I mm Weight kg
Product Name allowable dyn. load kN L mm S1 mm d1 mm d mm d2 mm S mm I mm Weight kg
HK CSTS 012 C 00 10 44.0 8 34 12 16.0 10 27 0.060
HK CSTS 015 C 00 17 51.0 10 40 15 20.0 12 31 0.120
HK CSTS 016 C 00 19 58.0 11 46 16 21.5 14 35 0.170
HK CSTS 017 C 00 21 58.0 11 46 17 22.5 14 35 0.180
HK CSTS 020 C 00 30 64.5 13 53 20 27.5 15 38 0.250
HK CSTS 025 C 00 48 77.0 17 64 25 33.5 20 45 0.450
HK CSTS 030 C 00 62 87.5 19 73 30 40.0 22 51 0.670
HK CSTS 035 C 00 80 102.0 21 82 35 47.0 25 61 0.980
HK CSTS 040 C 00 100 115.0 23 92 40 52.0 28 69 1.350
HK CSTS 045 C 00 127 128.0 27 102 45 58.0 32 77 1.930
HK CSTS 050 C 00 156 144.0 30 112 50 62.0 35 88 2.650
HK CSTS 060 C 00 245 167.5 38 135 60 70.0 44 100 4.600
HK CSTS 070 C 00 315 195.0 42 160 70 80.0 49 115 7.000
HK CSTS 080 C 00 400 231.0 47 180 80 95.0 55 141 11.000

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.