HK CSTS N

Pivot yoke with regreasable bearings

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Industry
Material Steel ST 52.3
Standard DIN 648, E SERIES, TYPE N

Hints

HKCSTS09N00 cannot be re-lubricated

Article Table

Product Name allowable dyn. load kN S1 mm d1 mm d mm Weight kg L mm S mm I mm
Product Name allowable dyn. load kN S1 mm d1 mm d mm Weight kg L mm S mm I mm
HK CSTS 016 N 00 21 14 48 16 0.29 59.0 18 35
HK CSTS 020 N 00 30 16 50 20 0.35 63.0 19 38
HK CSTS 025 N 00 48 20 55 25 0.53 72.5 23 45
HK CSTS 030 N 00 62 22 65 30 0.85 83.5 28 51
HK CSTS 035 N 00 80 25 83 35 1.50 102.5 30 61
HK CSTS 040 N 00 100 28 100 40 2.48 119.0 35 69
HK CSTS 045 N 00 127 32 110 45 3.45 132.0 40 77
HK CSTS 050 N 00 156 35 123 50 4.45 149.5 40 88
HK CSTS 060 N 00 245 44 140 60 7.10 170.0 50 100
HK CSTS 070 N 00 315 49 164 70 10.70 197.0 55 115
HK CSTS 080 N 00 400 55 180 80 15.10 231.0 60 141
HK CSTS 090 N 00 490 60 226 90 15.10 263.0 65 150

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.