HK DH01

Hand-operated directional control valve NG6

Properties

Connection ISO/Cetop 03 size 6
Design 4/2-way valve or 4/3-way valve
Max. operating pressure P, A, B: max. 350 bar / T: max. 160 bar
Mounting 4 pcs. socket head screw M5x50 12.9
Volumetric flow max. 50 l/min (note characteristic curves)

Description

Mechanical operation with hand lever
Hand lever mounted on side "A"

Hints

The O-rings (NBR 70° Shore A) for the valve port can be ordered as spare part separately under the following article number: 4 pieces OR8.73-1.78

Article Table

Product Name Overlap Weight kg Type Piston type Version
Product Name Overlap Weight kg Type Piston type Version
HK DH01 20 negative (open) 1.6 4/2 0 [PB/AT]-[PA/BT] Spring return
HK DH01 21 positive (closed) 1.6 4/2 1 [PB/AT]-[PA/BT] Spring return
HK DH01 50 negative (open) 1.6 4/2 0 [PB/AT]-[PA/BT] 2 latching positions
HK DH01 51 positive (closed) 1.6 4/2 1 [PB/AT]-[PA/BT] 2 latching positions
HK DH01 10 negative (open) 1.6 4/3 0 [PB/AT]-[ABPT]-[PA/BT] spring return to 0
HK DH01 11 positive (closed) 1.6 4/3 1 [PB/AT]-[A/B/P/T]-[PA/BT] spring return to 0
HK DH01 13 positive (closed) 1.6 4/3 3 [PB/AT]-[ABT/P]-[PA/BT] spring return to 0
HK DH01 14 negative (open) 1.6 4/3 4 [PA/BT]-[A/B/PT]-[PB/AT] spring return to 0
HK DH01 40 negative (open) 1.6 4/3 0 [PB/AT]-[ABPT]-[PA/BT] 3 latching positions
HK DH01 41 positive (closed) 1.6 4/3 1 [PB/AT]-[A/B/P/T]-[PA/BT] 3 latching positions
HK DH01 43 positive (closed) 1.6 4/3 3 [PB/AT]-[ABT/P]-[PA/BT] 3 latching positions
HK DH01 44 negative (open) 1.6 4/3 4 [PA/BT]-[A/B/PT]-[PB/AT] 3 latching positions
Piston type example: [A/B/PT] = [A blocked / B blocked / P+T connected]

Order hints

Further circuits and versions available on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.