HK DHQ

High speed/creep speed unit for flow control valve QV



Properties

Connection ISO/Cetop 03 size 6
Design as high speed/creep speed unit in combination with type HK QV 06 flow control valve, Sandwich body valve
Scope of supply with coil, 24 DC
Operating pressure max. 250 bar

Description

The high speed/creep speed unit consists of sandwich body valve HK DHQ in the bypass (high speed) and flow control valve HK QV 06, which keeps the preset volumetric flow constant with pressure compensation (creep speed).
Flow control (creep speed) is assured with switched solenoid
Max. volumetric flow via the non-return valve: 24 l/min
Max. free volumetric flow: 36 l/min
Plate height: 60 mm

Hints

Max. controlled volumetric flow (depending on the flow control valve used): HK QV 06 1: 1.5 l/min HK QV 06 6: 6 l/min HK QV 06 11: 11 l/min HK QV 06 16: 16 l/min HK QV 06 24: 24 l/min

Article Table

Product Name acts in channel Design Weight kg
Product Name acts in channel Design Weight kg
HK DHQ 011 OI 24DC P Inlet control 2,5
HK DHQ 023 OI 24DC A Inlet control 2,5
HK DHQ 024 OI 24DC B Inlet control 2,5
HK DHQ 013 OI 24DC A Drain control 2,5
HK DHQ 014 OI 24DC B Drain control 2,5
HK DHQ 016 OI 24DC T Drain control 2,5

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.