HK DK11

Hand-operated directional control valve NG10

Properties

Connection ISO/Cetop 05 size 10
Design 4/2-way valve or 4/3-way valve
Max. operating pressure P, A, B: max. 315 bar / T: max. 160 bar
Mounting 4 pcs. socket head screw M6x40 12.9
Volumetric flow max. 100 l/min (note characteristic curves)

Description

Mechanical operation with hand lever
Hand lever mounted on side "A"

Hints

The O-rings (NBR 70° Shore A) for the valve port can be ordered as spare part separately under the following article number: 5 pieces OR12.42-1.78 and 1 piece OR8.73-1.78

Article Table

Product Name Overlap Weight kg Type Piston type Version
Product Name Overlap Weight kg Type Piston type Version
HK DK11 20 negative (open) 2.5 4/2 0 [PB/AT]-[PA/BT] Spring return
HK DK11 21 positive (closed) 2.5 4/2 1 [PB/AT]-[PA/BT] Spring return
HK DK11 50 negative (open) 2.5 4/2 0 [PB/AT]-[PA/BT] 2 latching positions
HK DK11 51 positive (closed) 2.5 4/2 1 [PB/AT]-[PA/BT] 2 latching positions
HK DK11 10 negative (open) 2.8 4/3 0 [PB/AT]-[ABPT]-[PA/BT] spring return to 0
HK DK11 11 positive (closed) 2.8 4/3 1 [PB/AT]-[A/B/P/T]-[PA/BT] spring return to 0
HK DK11 13 positive (closed) 2.8 4/3 3 [PB/AT]-[ABT/P]-[PA/BT] spring return to 0
HK DK11 14 negative (open) 2.8 4/3 4 [PA/BT]-[A/B/PT]-[PB/AT] spring return to 0
HK DK11 40 negative (open) 2.8 4/3 0 [PB/AT]-[ABPT]-[PA/BT] 3 latching positions
HK DK11 41 positive (closed) 2.8 4/3 1 [PB/AT]-[A/B/P/T]-[PA/BT] 3 latching positions
HK DK11 43 positive (closed) 2.8 4/3 3 [PB/AT]-[ABT/P]-[PA/BT] 3 latching positions
HK DK11 44 negative (open) 2.8 4/3 4 [PA/BT]-[A/B/PT]-[PB/AT] 3 latching positions
Piston type example: [A/B/PT] = [A blocked / B blocked / P+T connected]

Order hints

Further circuits and versions available on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.