HK DKE X 00 AC

Solenoid-operated directional control valve size10 without coil

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection ISO/Cetop 05 size 10
Design 4/2-way valve or 4/3-way valve
3-chamber valve
with manual emergency operation
for AC coils
Max. operating pressure P, A, B: max. 350 bar / T: max. 160 bar
Mounting 4 pcs. socket head screw M6x40 12.9
Scope of supply without coil or plug
Volumetric flow max. 150 l/min (note characteristic curves)

Description

Can only be used for AC coils
switching capacity limits see characteristic curves

Hints

The O-rings (NBR 70° Shore A) for the valve port can be ordered as spare part separately under the following article number: 5 pieces OR12.42-1.78 and 1 piece OR8.73-1.78

Article Table

Product Name Overlap Weight kg Type Piston type Version
Product Name Overlap Weight kg Type Piston type Version
HK DKE 1610 X 00AC negative (open) 3.6 4/2 0 [PB/AT]-[ABPT] Spring return
HK DKE 1611 X 00AC positive (closed) 3.6 4/2 1 [PB/AT]-[A/B/P/T] Spring return
HK DKE 1613 X 00AC positive (closed) 3.6 4/2 3 [PB/AT]-[ABT/P] Spring return
HK DKE 1631 2 A 00AC positive (closed) 3.6 4/2 1/2 [PB/AT]-[PA/BT] Spring return
HK DKE 1631 2 X 00AC positive (closed) 3.6 4/2 1/2 [PB/AT]-[PA/BT] Spring return
HK DKE 1632 2 X 00AC positive (closed) 3.6 4/2 2/2 [PB/A/T]-[PA/B/T] Spring return
HK DKE 1710 X 00AC negative (open) 4.1 4/3 0 [PB/AT]-[ABPT]-[PA/BT] spring return to 0
HK DKE 1711 X 00AC positive (closed) 4.1 4/3 1 [PB/AT]-[A/B/P/T]-[PA/BT] spring return to 0
HK DKE 1713 X 00AC positive (closed) 4.1 4/3 3 [PB/AT]-[ABT/P]-[PA/BT] spring return to 0
HK DKE 1714 X 00AC negative (open) 4.1 4/3 4 [PA/BT]-[A/B/PT]-[PB/AT] spring return to 0
HK DKE 1751 2 X 00AC positive (closed) 3.3 4/2 1/2 [PB/AT]-[PA/BT] 2 latching positions
Piston type example: [A/B/PT] = [A blocked / B blocked / P+T connected]

Order hints

Further circuits and versions, volumetric flows and switching power limits on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.