HK DKZE A

Proportional solenoid-operated directional control valve size 10

Properties

Connection ISO/Cetop 05 size 10
Design 4/2-way valve or 4/3-way valve
direct-controlled
for applications in open control loop
Max. operating pressure P, A, B: max. 315 bar / T: max. 210 bar
Scope of supply with coil 12 VDC, without plug

Description

Completely encapsulated solenoid coils
Response time < 40 ms
Hysteresis < 5%
Without integrated position transducer (a pcb Type HK EBM AS is required for control)

Article Table

Product Name Control Type Overlap Piston type Version Volumetric flow max. l/min Weight kg
Product Name Control Type Overlap Piston type Version Volumetric flow max. l/min Weight kg
HK DKZE A 151 L5 linear 4/2 P, A, B, T positive (closed) L5 [A/B/P/T]-[PA/BT] Spring return 105.0 4.500
HK DKZE A 171 D5 progressive, passage A, B in ratio 2:1 4/3 P, A, B, T positive (closed) D5 [PB/AT]-[A/B/P/T]-[PA/BT] Spring return 105.0 6.100
HK DKZE A 171 S3 progressive 4/3 P, A, B, T positive (closed) S3 [PB/AT]-[A/B/P/T]-[PA/BT] spring return to 0 80.0 6.100
HK DKZE A 171 L5 linear 4/3 P, A, B, T positive (closed) L5 [PB/AT]-[A/B/P/T]-[PA/BT] spring return to 0 105.0 6.100
HK DKZE A 173 D5 progressive, passage A, B in ratio 2:1 4/3 P positive (closed); A, B, T negative (open) D5 [PB/AT]-[ABT/P]-[PA/BT] spring return to 0 105.0 6.100
HK DKZE A 173 S3 progressive 4/3 P positive (closed); A, B, T negative (open) S3 [PB/AT]-[ABT/P]-[PA/BT] spring return to 0 80.0 6.100
HK DKZE A 173 L5 linear 4/3 P positive (closed); A, B, T negative (open) L5 [PB/AT]-[ABT/P]-[PA/BT] spring return to 0 105.0 6.100
Piston type example: [A/B/PT] = [A blocked / B blocked / P+T connected]

Order hints

Other designs available on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.