HK DLKZOR TE

Proportional solenoid-operated directional control valve size 10



Properties

Connection ISO/Cetop 05 size 10
Design 4/3-way valve, direct-controlled, for applications in closed control loop
Scope of supply with integrated electronics, without plug
Operating pressure P, A, B: max. 315bar / T: max. 160bar
Volumetric flow max. 160 l/min (note characteristic curves)

Description

with hardened sleeve for max. overlapping accuracy
Completely encapsulated solenoid coils
Response time < 15 ms
Hysteresis < 0,1%
Pilot signal 0-10 VDC

Hints

(*) These 4/3-way valves are switched by only one coil. The off-center Fail-Safe position of the piston is reached by spring return after switching off the voltage.

Article Table

Product Name Type Overlap Control Design Piston type Weight kg
Product Name Type Overlap Control Design Piston type Weight kg
HK DLKZOR TE 140 L71 4/3 Zero linear Spring return to Fail-Safe Position (*) L7 [A/B/P/T]-[PB/AT]-[ABPT]-[PA/BT] 4,7
HK DLKZOR TE 140 L73 4/3 Zero linear Spring return to Fail-Safe Position (*) L7 [ABT/P]-[PB/AT]-[ABPT]-[PA/BT] 4,7
Piston type example: [A/B/PT] = [A blocked / B blocked / P+T connected]

Order hints

Other designs available on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.