HK DPH 2

Directional control valve NG16



Properties

Connection ISO/Cetop 07 NG16
Design 4/3-way valve (without pilot valve), pilot-controlled
Mounting 2 No. hex. socket head screw M6x40 12.9 + 4 No. M10x50 12.9
Operating pressure P, A, B: max. 350bar / T: max. 210bar
Volumetric flow max. 300 l/min (note characteristic curves)

Description

These valves are actuated by a leak oil-reduced, solenoid-operated directional control valve size 6 set up as a pilot valve (type HK DHE *P*).
Control is internal, but conversion to external is possible.
The minimum control pressure for correct functioning is 8 bar. With the version with the control pressure generator, an additional pressure drop occurs, which ensures the minimum required control pressure for correct functioning. The version with the control pressure generator must be used if the pressure drop in the valve is below the minimum control pressure.

Article Table

Product Name Type Overlap Piston type Design Weight kg
Product Name Type Overlap Piston type Design Weight kg
HK DPH 2 710 DR SPIL 4/3 negative (open) 0 [PB/AT]-[ABPT]-[PA/BT] Spring return, control pressure generator 7,5
HK DPH 2 711 D SPIL 4/3 positive (closed) 1 [PB/AT]-[A/B/P/T]-[PA/BT] Spring return 7,5
HK DPH 2 713 D SPIL 4/3 positive (closed) 3 [PB/AT]-[ABT/P]-[PA/BT] Spring return 8,0
HK DPH 2 714 DR SPIL 4/3 negative (open) 4 [PA/BT]-[A/B/PT]-[PB/AT] Spring return, control pressure generator 7,5
Piston type example: [A/B/PT] = [A blocked / B blocked / P+T connected]

Order hints

Further circuits and versions, volumetric flows and switching power limits on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.