HK DTDA

2/2-way solenoid-operated directional control valve DTDA

  • Image_1 Image_1
  • Image_2 Image_2
  • Image_3 Image_3

Properties

Design direct-controlled
with manual emergency operation
Max. operating pressure max. 350 bar
Scope of supply without coil or plug

Description

Max. leakage 0.7cm3/min at 250 bar and 32cSt

Article Table

Product Name Screw-in housing C mm A mm Screw-in thread Tightening torque Nm AF mm Volumetric flow min. l/min Version B mm Weight kg
Product Name Screw-in housing C mm A mm Screw-in thread Tightening torque Nm AF mm Volumetric flow min. l/min Version B mm Weight kg
HK DTDA MCN HK GAU
HK GAUS
HK GAV
37.0 89.0 T-13A 48.0 22 40.0 power-off closed, double locking 35.0 0.500
HK DTDA MHN HK GAU
HK GAUS
HK GAV
37.0 89.0 T-13A 48.0 22 40.0 power-off open, double locking 35.0 0.500

Order hints

Please order solenoid coil separately (see accessories)

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.