HK FDCV

Flow divider / combiner FDCV

Properties

Design pressure-compensated
Max. operating pressure max. 350 bar

Description

flow divider / combiner - pressure compensated
Division ratio 50 % : 50 %
Max. deviation at Q 40% Qmax: ± 2.5%

Hints

Die grösste Teilgenauigkeit wird im Bereich des maximalen Eingangsvolumenstromes erreicht.
Diese Ventile sind auch für die Summierung von Volumenströmen verwendbar.
(siehe Schaltsymbol), Anzugsdrehmoment für Ventilgrösse 10 in Alugehäuse: 47-54 Nm, Anzugsdrehmoment für Ventilgrösse 10 in Stahlgehäuse: 74-81 Nm

Article Table

Product Name Einschraubgehäuse Qein max. l/min Gewicht kg Qein min. l/min Einschraubgewinde
Product Name Einschraubgehäuse Qein max. l/min Gewicht kg Qein min. l/min Einschraubgewinde
HKFDCV10N011 HK GEH 12 C1040 ST 7.0 l/min 0.14 kg 3.5 l/min SAE 10/2 7/8"-14UNF-2B
HKFDCV10N022 HK GEH 12 C1040 ST 15.0 l/min 0.14 kg 7.5 l/min SAE 10/2 7/8"-14UNF-2B
HKFDCV10N033 HK GEH 12 C1040 ST 22.0 l/min 0.14 kg 11.0 l/min SAE 10/2 7/8"-14UNF-2B
HKFDCV10N044 HK GEH 12 C1040 ST 30.0 l/min 0.14 kg 15.0 l/min SAE 10/2 7/8"-14UNF-2B
HKFDCV10N066 HK GEH 12 C1040 ST 45.0 l/min 0.14 kg 22.5 l/min SAE 10/2 7/8"-14UNF-2B
HKFDCV10N088 HK GEH 12 C1040 ST 60.0 l/min 0.14 kg 30.0 l/min SAE 10/2 7/8"-14UNF-2B
Qein - intake volumetric flow

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.