HK FI AD MV VARIO PA

Adsorber filter reusable with valve



Properties

Connection at bottom
Design high quality valve system, Integrated filter element 3 μm, Reusable with activated charcoal filter, with valves, stable aluminium-base
Installation position vertical
Temp. range -40 °C to +70 °C
Material Gasket: NBR, Housing: Aluminium and acrylic

Description

These reusable adsorber filters are used for the ventilation of hygroscopic substances of any kind.

Hints

Other variants with housing in aluminum or stainless steel as well as for aggressive media are available on request.
Design bases are medium, air flow rate or clunk pick-up volume.

Article Table

Product Name Air volume L/min for tank size A mm B mm C mm G Weight kg
Product Name Air volume L/min for tank size A mm B mm C mm G Weight kg
HK FI AD 310 MV N AF VPA 20 100 - 600 litres 311,0 110,0 148,0 G 3/4” 2,3
HK FI AD 330 MV N AF VPA 40 100 - 600 litres 412,0 110,0 148,0 G 3/4” 3,0
HK FI AD 510 MV N AF VPA 100 600 - 1800 litres 329,0 150,0 187,0 G 1" 4,6
HK FI AD 560 MV N AF VPA 210 1800 - 3600 litres 549,0 150,0 187,0 G 1" 7,9
Air volume: Recommended air throughput for optimum drying efficiency

Order hints

For tank mounting the mounting flange HK FI AD FS must be ordered if necessary.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.