HK FPMD

Pressure relief valve FPMD (shock valve)

  • Image_1 Image_1
  • Image_2 Image_2
  • Image_3 Image_3

Properties

Design direct-controlled, double-acting
Max. operating pressure max. 250 bar with aluminium housing / max. 350 bar with steel housing
Online-Shop https://shop.hansa-flex.com/de/HKFPMD

Hints

Diese Ventile müssen auf den Anwendungsfall eingestellt werden

Article Table

Product Name Ø F mm Gewicht kg Druckeinstellbereich bar Werkstoff B mm D mm E mm C mm A mm G mm Druck max. bar Volumenstrom max. l/min Gewinde V1 + V2
Product Name Ø F mm Gewicht kg Druckeinstellbereich bar Werkstoff B mm D mm E mm C mm A mm G mm Druck max. bar Volumenstrom max. l/min Gewinde V1 + V2
HKFPMD40ILP38S35 9 mm 0.8 kg 80 - 350 Steel 80 mm 32 mm 57 mm 35 mm 78 mm 30 mm 350 bar 40.0 l/min G 3/8”
HKFPMD70ILP12A20 9 mm 1.0 kg 80 - 250 Aluminium 100 mm 34 mm 57 mm 40 mm 92 mm 38 mm 250 bar 80.0 l/min G 1/2”
HKFPMD70ILP12S35 9 mm 1.3 kg 100 - 350 Steel 100 mm 34 mm 57 mm 40 mm 92 mm 38 mm 350 bar 80.0 l/min G 1/2”
Material applies to the housing

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.