HK FS

Flow divider / combiner FS



Properties

Design pressure-compensated
Operating pressure max. 350 bar

Description

Δp at max nominal flow = 20 bar
Same accuracy when dividing or combining the oil flows
Division accuracy in % of total oil flow at connection 3:
HKFSBS at 12l/min = 50% ± 2.5%; HKFSBS at 2.5l/min = 50% ± 4.5%
HKFSCS at 30l/min = 50% ± 2.5%; HKFSCS at 6l/min = 50% ± 4.5%
At Q < Qmin the division accuracy is indeterminate

Article Table

Product Name Volumetric flow min. L/min Volumetric flow max. L/min A mm B mm Screw-in housing Screw-in thread AF mm Tightening torque N-m Weight kg
Product Name Volumetric flow min. L/min Volumetric flow max. L/min A mm B mm Screw-in housing Screw-in thread AF mm Tightening torque N-m Weight kg
HK FS BS XAN 2,5 12,0 19,0 85,0 HK MBJ M T-31A 22 50,0 0,5
HK FS CS XAN 6,0 30,0 19,0 85,0 HK MBJ M T-31A 22 50,0 0,5

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.