HK GEH 20 AL

Aluminium housing for SAE 2-way cartridge valve

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Material Aluminium AlZnMgCu1.5
Max. operating pressure max. 250 bar
Surface anodised

Article Table

Product Name Weight kg H mm Connection 1,3 Valve bore L mm M mm G mm D mm E mm A C mm F mm I mm
Product Name Weight kg H mm Connection 1,3 Valve bore L mm M mm G mm D mm E mm A C mm F mm I mm
HK GEH 38 C0820 0.2 12 G 3/8" C0820 9.0 35 13.5 50 29 UNF 3/4" -16 50 20 6
HK GEH 38 C1020 0.4 15 G 3/8" C1020 7.5 45 19.0 60 39 UNF 7/8" -14 60 24 7
HK GEH 34 C1020 0.6 15 G 3/4" C1020 7.5 45 21.5 60 44 UNF 7/8" -14 60 24 7
HK GEH 12 C1220 0.8 18 G 1/2" C1220 10.0 60 26.0 80 49 UNF 1 1/16" -12 80 34 9
HK GEH 34 C1220 0.8 18 G 3/4" C1220 10.0 60 26.0 80 49 UNF 1 1/16" -12 80 34 9

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.