HK HFR

Standard double-acting cylinders with fastening

  • Image_1 Image_1
  • Image_2 Image_2
  • Image_3 Image_3

Properties

Design with attachment elements
Material Cylinder base: FE 510-A105, Oil filler neck: Steel 9SMn28, Nut: Steel 8UNI EN20898/2
Max. operating pressure max. 200 bar (acc. DIN EN 982)
Media HLP fluids
Online-Shop https://shop.hansa-flex.com/de/HKHFR
Seal Gasket TPM: NBR, Gasket OR: NBR Fluorosil Viton, Gasket TSE-TTS-TTI/L: NBR + fabric / polyurethane, Gasket GHM-GHK: NBR / polyurethane
Temp. range Standard version -15 °C to +80 °C
Test pressure max. 240 bar (acc. DIN EN 982)

Description

Please observe the stipulations of EN ISO 4413 “Safety requirements for fluid power systems and their components” as well as specifications and safety requirements based on statutory regulations when selecting
installing and operating the cylinders.
Our hydraulic cylinders and their components are designed for standard applications in industry and agriculture. They can be used only in some circumstances for applications in construction machinery. If this is your intention
please contact our technical personnel. The cylinders conform to the technical specifications in the catalogue or are designed to customers' specifications (approval drawing).

Hints

HK HFR0 16 Führungsgehäuse aus Aluminium, Kolbengeschwindigkeit bezogen auf Standarddichtungen: Max.
25m/min - 0,42m/sec.
Kolbengeschwindigkeit in die Endlagen: Max.
6m/min - 0,10m/sec.
Bei diesen Standardzylindern wird empfohlen, keine Befestigungen am Zylinderrohr (z.
B.
kardanische Befestigung) anzuschweißen, da sich sonst das Zylinderrohr verziehen kann.

Article Table

Product Name Ø F mm Ø E Hub mm M mm L1 mm L mm N mm G mm Ø A mm Ø D mm Ø S mm Gewicht kg Z mm
Product Name Ø F mm Ø E Hub mm M mm L1 mm L mm N mm G mm Ø A mm Ø D mm Ø S mm Gewicht kg Z mm
HKHFR0160050 12.1 mm 1/4" 50 mm 22 mm 25 mm 25 mm 64 mm 35 mm 25 mm 35 mm 16 mm 0.95 kg 160 mm
HKHFR0160100 12.1 mm 1/4" 100 mm 22 mm 25 mm 25 mm 64 mm 35 mm 25 mm 35 mm 16 mm 1.25 kg 210 mm
HKHFR0160150 12.1 mm 1/4" 150 mm 22 mm 25 mm 25 mm 64 mm 35 mm 25 mm 35 mm 16 mm 1.49 kg 260 mm
HKHFR0160200 12.1 mm 1/4" 200 mm 22 mm 25 mm 25 mm 64 mm 35 mm 25 mm 35 mm 16 mm 1.77 kg 310 mm
HKHFR0200050 16.2 mm 1/4" 50 mm 35 mm 30 mm 35 mm 84 mm 40 mm 32 mm 42 mm 20 mm 1.70 kg 205 mm
HKHFR0200100 16.2 mm 1/4" 100 mm 35 mm 30 mm 35 mm 84 mm 40 mm 32 mm 42 mm 20 mm 2.03 kg 255 mm
HKHFR0200150 16.2 mm 1/4" 150 mm 35 mm 30 mm 35 mm 84 mm 40 mm 32 mm 42 mm 20 mm 2.40 kg 305 mm
HKHFR0200200 16.2 mm 1/4" 200 mm 35 mm 30 mm 35 mm 84 mm 40 mm 32 mm 42 mm 20 mm 2.77 kg 355 mm
HKHFR0200250 16.2 mm 1/4" 250 mm 35 mm 30 mm 35 mm 84 mm 40 mm 32 mm 42 mm 20 mm 3.11 kg 405 mm
HKHFR0200300 16.2 mm 1/4" 300 mm 35 mm 30 mm 35 mm 84 mm 40 mm 32 mm 42 mm 20 mm 3.48 kg 455 mm
HKHFR0200400 16.2 mm 1/4" 400 mm 35 mm 30 mm 35 mm 84 mm 40 mm 32 mm 42 mm 20 mm 4.19 kg 555 mm
HKHFR0200500 16.2 mm 1/4" 500 mm 35 mm 30 mm 35 mm 84 mm 40 mm 32 mm 42 mm 20 mm 4.90 kg 655 mm
Ø A = piston diameter, Ø S = piston rod diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.