HK HM

Standard double-acting cylinders without fastening



Properties

Design without mounting elements
Media HLP fluids
Temp. range Standard version -15 °C to +80 °C
Material Cylinder base: FE 510-A105, Gasket GHM-GHK: NBR / polyurethane, Gasket OR: NBR Fluorosil Viton, Gasket TPM: NBR, Gasket TSE-TTS-TTI/L: NBR + fabric / polyurethane, Nut: Steel 8UNI EN20898/2, Oil filler neck: Steel 9SMn28, Piston rod guide: Steel 9SMn28, Piston rod: Resistance for 120 h in the NSS test according to ISO 3768, Piston rod: Steel 20MnV6, Chrome 25 μm ±/- 5, Piston: Steel 9SMn28, Polished cylinder barrel: ST 52.3 DIN 2393-ISO H9
Operating pressure max. 200 bar (acc. DIN EN 982)
Test pressure max. 240 bar (acc. DIN EN 982)

Description

Please observe the stipulations of EN ISO 4413 “Safety requirements for fluid power systems and their components” as well as specifications and safety requirements based on statutory regulations when selecting, installing and operating the cylinders.
Our hydraulic cylinders and their components are designed for standard applications in industry and agriculture. They can be used only in some circumstances for applications in construction machinery. If this is your intention, please contact our technical personnel. The cylinders conform to the technical specifications in the catalogue or are designed to customers' specifications (approval drawing).

Hints

Piston speed based on standard seals: Max. 25m/min - 0.42m/sec.
Piston speed to the end positions: max. 6m/min - 0.10m/sec.
For these standard cylinders, it is recommended not to weld any fastenings to the cylinder liner (e.g. cardan mountings) as this could distort it.

Article Table

Product Name Ø D mm Ø A mm Ø S mm Stroke mm Z mm C mm E L mm L1 mm Weight kg
Product Name Ø D mm Ø A mm Ø S mm Stroke mm Z mm C mm E L mm L1 mm Weight kg
HK HM 01 20 0100 50 40 20 100 230 22,0 G 1/4” 40 23 2,27
HK HM 01 20 0150 50 40 20 150 280 22,0 G 1/4” 40 23 2,67
HK HM 01 20 0200 50 40 20 200 330 22,0 G 1/4” 40 23 3,05
HK HM 01 20 0250 50 40 20 250 380 22,0 G 1/4” 40 23 3,45
HK HM 01 20 0300 50 40 20 300 430 22,0 G 1/4” 40 23 3,85
HK HM 01 20 0350 50 40 20 350 480 22,0 G 1/4” 40 23 4,27
HK HM 01 20 0400 50 40 20 400 530 22,0 G 1/4” 40 23 4,65
HK HM 01 20 0450 50 40 20 450 580 22,0 G 1/4” 40 23 5,08
HK HM 01 20 0500 50 40 20 500 630 22,0 G 1/4” 40 23 5,49
HK HM 01 25 0100 50 40 25 100 230 22,0 G 1/4” 40 23 2,75
HK HM 01 25 0150 50 40 25 150 280 22,0 G 1/4” 40 23 2,95
HK HM 01 25 0200 50 40 25 200 330 22,0 G 1/4” 40 23 3,39
HK HM 01 25 0250 50 40 25 250 380 22,0 G 1/4” 40 23 3,85
HK HM 01 25 0300 50 40 25 300 430 22,0 G 1/4” 40 23 4,32
HK HM 01 25 0350 50 40 25 350 480 22,0 G 1/4” 40 23 4,79
HK HM 01 25 0400 50 40 25 400 530 22,0 G 1/4” 40 23 5,26
HK HM 01 25 0450 50 40 25 450 580 22,0 G 1/4” 40 23 5,72
HK HM 01 25 0500 50 40 25 500 630 22,0 G 1/4” 40 23 6,20
HK HM 01 25 0550 50 40 25 550 680 22,0 G 1/4” 40 23 6,60
HK HM 01 25 0600 50 40 25 600 730 22,0 G 1/4” 40 23 7,13
HK HM 02 25 0100 60 50 25 100 240 22,0 G 3/8” 43 26 3,29
HK HM 02 25 0150 60 50 25 150 290 22,0 G 3/8” 43 26 3,83
HK HM 02 25 0200 60 50 25 200 340 22,0 G 3/8” 43 26 4,34
HK HM 02 25 0250 60 50 25 250 390 22,0 G 3/8” 43 26 4,85
HK HM 02 25 0300 60 50 25 300 440 22,0 G 3/8” 43 26 5,35
HK HM 02 25 0350 60 50 25 350 490 22,0 G 3/8” 43 26 5,94
HK HM 02 25 0400 60 50 25 400 540 22,0 G 3/8” 43 26 6,40
HK HM 02 25 0450 60 50 25 450 590 22,0 G 3/8” 43 26 7,30
HK HM 02 25 0500 60 50 25 500 640 22,0 G 3/8” 43 26 7,43
HK HM 02 25 0550 60 50 25 550 690 22,0 G 3/8” 43 26 8,06
HK HM 02 25 0600 60 50 25 600 740 22,0 G 3/8” 43 26 8,46
HK HM 02 25 0800 60 50 25 800 940 22,0 G 3/8” 43 26 10,71
HK HM 02 25 1000 60 50 25 1000 1140 22,0 G 3/8” 43 26 12,87
HK HM 02 30 0150 60 50 30 150 290 22,0 G 3/8” 43 26 4,11
HK HM 02 30 0200 60 50 30 200 340 22,0 G 3/8” 43 26 4,74
HK HM 02 30 0250 60 50 30 250 390 22,0 G 3/8” 43 26 5,35
HK HM 02 30 0300 60 50 30 300 440 22,0 G 3/8” 43 26 5,97
HK HM 02 30 0350 60 50 30 350 490 22,0 G 3/8” 43 26 6,55
HK HM 02 30 0400 60 50 30 400 540 22,0 G 3/8” 43 26 7,20
HK HM 02 30 0450 60 50 30 450 590 22,0 G 3/8” 43 26 7,80
HK HM 02 30 0500 60 50 30 500 640 22,0 G 3/8” 43 26 8,42
HK HM 02 30 0550 60 50 30 550 690 22,0 G 3/8” 43 26 9,04
HK HM 02 30 0600 60 50 30 600 740 22,0 G 3/8” 43 26 9,64
HK HM 02 30 0800 60 50 30 800 940 22,0 G 3/8” 43 26 12,10
HK HM 02 30 1000 60 50 30 1000 1140 22,0 G 3/8” 43 26 14,57
HK HM 03 30 0100 70 60 30 100 260 23,0 G 3/8” 50 30 4,82
HK HM 03 30 0150 70 60 30 150 310 23,0 G 3/8” 50 30 5,55
HK HM 03 30 0200 70 60 30 200 360 23,0 G 3/8” 50 30 6,20
HK HM 03 30 0250 70 60 30 250 410 23,0 G 3/8” 50 30 6,87
HK HM 03 30 0300 70 60 30 300 460 23,0 G 3/8” 50 30 7,55
HK HM 03 30 0350 70 60 30 350 510 23,0 G 3/8” 50 30 8,20
HK HM 03 30 0400 70 60 30 400 560 23,0 G 3/8” 50 30 8,90
HK HM 03 30 0450 70 60 30 450 610 23,0 G 3/8” 50 30 9,53
HK HM 03 30 0500 70 60 30 500 660 23,0 G 3/8” 50 30 10,25
HK HM 03 30 0550 70 60 30 550 710 23,0 G 3/8” 50 30 10,83
HK HM 03 30 0600 70 60 30 600 760 23,0 G 3/8” 50 30 11,60
HK HM 03 30 0800 70 60 30 800 960 23,0 G 3/8” 50 30 14,26
HK HM 03 30 1000 70 60 30 1000 1160 23,0 G 3/8” 50 30 17,00
HK HM 03 35 0100 70 60 35 100 260 23,0 G 3/8” 50 30 5,07
HK HM 03 35 0150 70 60 35 150 310 23,0 G 3/8” 50 30 5,85
HK HM 03 35 0200 70 60 35 200 360 23,0 G 3/8” 50 30 6,60
HK HM 03 35 0250 70 60 35 250 410 23,0 G 3/8” 50 30 7,40
HK HM 03 35 0300 70 60 35 300 460 23,0 G 3/8” 50 30 8,15
HK HM 03 35 0350 70 60 35 350 510 23,0 G 3/8” 50 30 8,94
HK HM 03 35 0400 70 60 35 400 560 23,0 G 3/8” 50 30 9,72
HK HM 03 35 0450 70 60 35 450 610 23,0 G 3/8” 50 30 10,47
HK HM 03 35 0500 70 60 35 500 660 23,0 G 3/8” 50 30 11,25
HK HM 03 35 0550 70 60 35 550 710 23,0 G 3/8” 50 30 12,00
HK HM 03 35 0600 70 60 35 600 760 23,0 G 3/8” 50 30 12,81
HK HM 03 35 0800 70 60 35 800 960 23,0 G 3/8” 50 30 15,87
HK HM 03 35 1000 70 60 35 1000 1160 23,0 G 3/8” 50 30 18,93
HK HM 03 40 0200 70 60 40 200 360 23,0 G 3/8” 50 30 7,25
HK HM 03 40 0250 70 60 40 250 410 23,0 G 3/8” 50 30 8,14
HK HM 03 40 0300 70 60 40 300 460 23,0 G 3/8” 50 30 9,03
HK HM 03 40 0350 70 60 40 350 510 23,0 G 3/8” 50 30 9,90
HK HM 03 40 0400 70 60 40 400 560 23,0 G 3/8” 50 30 10,79
HK HM 03 40 0450 70 60 40 450 610 23,0 G 3/8” 50 30 11,64
HK HM 03 40 0500 70 60 40 500 660 23,0 G 3/8” 50 30 12,52
HK HM 03 40 0550 70 60 40 550 710 23,0 G 3/8” 50 30 13,45
HK HM 03 40 0600 70 60 40 600 760 23,0 G 3/8” 50 30 14,30
HK HM 03 40 0800 70 60 40 800 960 23,0 G 3/8” 50 30 17,82
HK HM 03 40 1000 70 60 40 1000 1160 23,0 G 3/8” 50 30 21,40
HK HM 04 30 0200 80 70 30 200 360 23,0 G 3/8” 50 33 7,50
HK HM 04 35 0100 80 70 35 100 260 23,0 G 3/8” 50 33 6,09
HK HM 04 35 0150 80 70 35 150 310 23,0 G 3/8” 50 33 6,95
HK HM 04 35 0200 80 70 35 200 360 23,0 G 3/8” 50 33 7,74
HK HM 04 35 0250 80 70 35 250 410 23,0 G 3/8” 50 33 8,60
HK HM 04 35 0300 80 70 35 300 460 23,0 G 3/8” 50 33 9,40
HK HM 04 35 0350 80 70 35 350 510 23,0 G 3/8” 50 33 10,26
HK HM 04 35 0400 80 70 35 400 560 23,0 G 3/8” 50 33 11,00
HK HM 04 35 0450 80 70 35 450 610 23,0 G 3/8” 50 33 11,88
HK HM 04 35 0500 80 70 35 500 660 23,0 G 3/8” 50 33 12,60
HK HM 04 35 0550 80 70 35 550 710 23,0 G 3/8” 50 33 13,66
HK HM 04 35 0600 80 70 35 600 760 23,0 G 3/8” 50 33 14,20
HK HM 04 35 0800 80 70 35 800 960 23,0 G 3/8” 50 33 17,56
HK HM 04 35 1000 80 70 35 1000 1160 23,0 G 3/8” 50 33 21,26
HK HM 04 40 0100 80 70 40 100 260 23,0 G 3/8” 50 33 8,20
HK HM 04 40 0200 80 70 40 200 360 23,0 G 3/8” 50 33 8,20
HK HM 04 40 0250 80 70 40 250 410 23,0 G 3/8” 50 33 9,26
HK HM 04 40 0300 80 70 40 300 460 23,0 G 3/8” 50 33 10,24
HK HM 04 40 0350 80 70 40 350 510 23,0 G 3/8” 50 33 11,20
HK HM 04 40 0400 80 70 40 400 560 23,0 G 3/8” 50 33 12,80
HK HM 04 40 0450 80 70 40 450 610 23,0 G 3/8” 50 33 13,11
HK HM 04 40 0500 80 70 40 500 660 23,0 G 3/8” 50 33 14,01
HK HM 04 40 0550 80 70 40 550 710 23,0 G 3/8” 50 33 15,10
HK HM 04 40 0600 80 70 40 600 760 23,0 G 3/8” 50 33 15,99
HK HM 04 40 0800 80 70 40 800 960 23,0 G 3/8” 50 33 19,73
HK HM 04 40 1000 80 70 40 1000 1160 23,0 G 3/8” 50 33 23,51
HK HM 05 40 0200 92 80 40 200 380 25,0 G 1/2” 60 35 11,08
HK HM 05 40 0250 92 80 40 250 430 25,0 G 1/2” 60 35 12,22
HK HM 05 40 0300 92 80 40 300 480 25,0 G 1/2” 60 35 13,36
HK HM 05 40 0400 92 80 40 400 580 25,0 G 1/2” 60 35 15,56
HK HM 05 40 0500 92 80 40 500 680 25,0 G 1/2” 60 35 17,77
HK HM 05 40 0600 92 80 40 600 780 25,0 G 1/2” 60 35 19,98
HK HM 05 40 0800 92 80 40 800 980 25,0 G 1/2” 60 35 24,50
HK HM 05 40 1000 92 80 40 100 1180 25,0 G 1/2” 60 35 29,03
HK HM 05 50 0200 92 80 50 200 380 25,0 G 1/2” 60 35 12,35
HK HM 05 50 0250 92 80 50 250 430 25,0 G 1/2” 60 35 13,73
HK HM 05 50 0300 92 80 50 300 480 25,0 G 1/2” 60 35 15,15
HK HM 05 50 0400 92 80 50 400 580 25,0 G 1/2” 60 35 17,93
HK HM 05 50 0500 92 80 50 500 680 25,0 G 1/2” 60 35 20,71
HK HM 05 50 0600 92 80 50 600 780 25,0 G 1/2” 60 35 23,49
HK HM 05 50 0800 92 80 50 800 980 25,0 G 1/2” 60 35 29,50
HK HM 05 50 1000 92 80 50 100 1180 25,0 G 1/2” 60 35 35,00
HK HM 06 50 0200 115 100 50 200 410 25,0 G 1/2” 82 38 19,50
HK HM 06 50 0250 115 100 50 250 460 25,0 G 1/2” 82 38 21,50
HK HM 06 50 0300 115 100 50 300 510 25,0 G 1/2” 82 38 23,00
HK HM 06 50 0400 115 100 50 400 610 25,0 G 1/2” 82 38 26,50
HK HM 06 50 0500 115 100 50 500 710 25,0 G 1/2” 82 38 30,00
HK HM 06 50 0600 115 100 50 600 810 25,0 G 1/2” 82 38 33,50
HK HM 06 50 0800 115 100 50 800 1010 25,0 G 1/2” 82 38 40,50
HK HM 06 50 1000 115 100 50 1000 1210 25,0 G 1/2” 82 38 47,50
HK HM 06 60 0300 115 100 60 300 510 25,0 G 1/2” 82 38 25,50
HK HM 06 60 0400 115 100 60 400 610 25,0 G 1/2” 82 38 29,50
HK HM 06 60 0500 115 100 60 500 710 25,0 G 1/2” 82 38 33,50
HK HM 06 60 0600 115 100 60 600 810 25,0 G 1/2” 82 38 37,50
HK HM 06 60 0800 115 100 60 800 1010 25,0 G 1/2” 82 38 46,00
HK HM 06 60 1000 115 100 60 1000 1210 25,0 G 1/2” 82 38 54,50
Ø A = piston diameter - Ø S = piston rod diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.