HK HM BMP HD

BMP HD CN gerotor motor

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection Oil fittings: A + B = G 1/2"
Design Economy variant
Type "HD" with high-pressure gasket
Shaft Ø 25mm
two hole flange bolt circle 106.4
Intake and return pressure with leak oil line max. 175 bar
Leak oil connection G 1/4"

Hints

Please use a screw-in fitting with short thread when connecting a leak oil line to the motor.

Article Table

Product Name Pressure drop max. bar Pmax. at 100-300 rpm bar Weight kg L mm Pmax. at 300-600 rpm bar Pmax. at 600 rpm bar Torque max. Nm Pmax. at 0-100 rpm bar Speed max. r/min Flow rate max. l/min Displacement cm³ Speed min. r/min
Product Name Pressure drop max. bar Pmax. at 100-300 rpm bar Weight kg L mm Pmax. at 300-600 rpm bar Pmax. at 600 rpm bar Torque max. Nm Pmax. at 0-100 rpm bar Speed max. r/min Flow rate max. l/min Displacement cm³ Speed min. r/min
HK HM BMP 050 HD 140 75 5.8 141 50 20 89 150 800 40 52.9 10
HK HM BMP 080 HD 140 75 5.9 145 50 20 149 150 770 60 79.3 10
HK HM BMP 100 HD 140 75 6.1 147 50 20 191 150 615 60 98.2 10
HK HM BMP 125 HD 140 75 6.2 150 50 - 235 150 480 60 120.9 10
HK HM BMP 160 HD 140 75 6.4 155 50 - 307 150 385 60 158.7 10
HK HM BMP 200 HD 140 75 6.6 160 50 - 365 150 310 60 196.4 10
HK HM BMP 250 HD 110 75 6.8 166 - - 370 150 250 60 241.8 10
HK HM BMP 315 HD 90 75 7.1 176 - - 370 150 195 60 317.3 10
HK HM BMP 400 HD 70 75 7.6 186 - - 370 150 155 60 392.9 10
Values for torque and pressure drop apply for continuous operation
max. pressure on shaft seal (without leak oil line) or pressure in leak oil line

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.