HK IHV

Bladder accumulator



Properties

Design Vertical installation position, gas side top
Temp. range Standard version -15 °C to +80 °C
Material Bladder: NBR standard version
Operating pressure max. 350 bar

Hints

Repair kits, see HK IHV...REPKIT
Gas charge pressure p0 – between 0.9 p1 and 0.25 p2 (p1 = min. system pressure, p2 = max. system pressure)
CE label for all bladder accumulators

Article Table

Product Name Gas volume l L p max. bar A mm B mm C mm Ø D mm Ø d mm E mm F Ø G mm Weight kg
Product Name Gas volume l L p max. bar A mm B mm C mm Ø D mm Ø d mm E mm F Ø G mm Weight kg
HK IHV 1.6 350 3/4 1,6 350 395 54 26 114 16 315 G 3/4” 36 7
HK IHV 2.5 350 11/4 2,4 350 532 66 57 114 22 409 G 1.1/4” 53 10
HK IHV 4.0 350 11/4 3,7 350 407 66 57 168 22 284 G 1.1/4” 53 16
HK IHV 5.0 350 11/4 5,0 350 881 66 57 114 22 758 G 1.1/4” 53 17
HK IHV 10.0 350 11/4 10,0 350 807 66 57 168 22 684 G 1.1/4” 53 28
HK IHV 10.0 330 K 2 9,2 330 565 101 57 221 22 407 G 2" 76 32
pmax = max. working pressure

Order hints

The accumulators will be delivered uncharged from stock. N2-chargings according to customer requirements arise separate costs.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.