HK IHV REPKIT

Repair kit for bladder accumulator

  • Image_1 Image_1
  • Image_2 Image_2

Description

For IHV bladder accumulators
Consisting of replacement bladder, seal kit and split ring

Hints

Repairs to pressure accumulators may only be carried out by qualified personnel! Please observe the repair instructions supplied.

Article Table

Product Name Weight kg Replacement bladder for bladder accumulator
Product Name Weight kg Replacement bladder for bladder accumulator
HK IHV 1.0 REPKIT 0.5 Bladder 1.0 litre NBR, Ø22 mm 7/8"-14UNF HK IHV 1.0 ltr
HK IHV 1.6 REPKIT 0.6 Bladder 1.6 litre NBR, Ø16 mm 5/8"-14UNF HK IHV 1,6 ltr
HK IHV 2.5 REPKIT 0.7 Bladder 2.5 litre NBR, Ø22 mm 7/8"-14UNF HK IHV 2.5 ltr
HK IHV 4.0 REPKIT 1.0 Bladder 4.0 litre NBR, Ø22 mm 7/8"-14UNF HK IHV 4.0 ltr
HK IHV 5.0 REPKIT 1.2 Bladder 5.0 litre NBR, Ø22 mm 7/8"-14UNF HK IHV 5.0 ltr
HK IHV 6.0 REPKIT 1.5 Bladder 6.0 litre NBR, Ø22 mm 7/8"-14UNF HK IHV 6.0 ltr
HK IHV 10.0 REPKIT 1.5 Bladder 10.0 litre NBR, Ø22 mm 7/8"-14UNF HK IHV 10.0 ltr
HK IHV 10K2 REPKIT 1.7 Bladder 10.0 litre K2 NBR, Ø22 mm 7/8"-14UNF HK IHV 10.0 ltr K2
HK IHV 12.0 REPKIT 2.0 Bladder 12.0 litre NBR, Ø22 mm 7/8"-14UNF HK IHV 12.0 ltr
HK IHV 20.0 REPKIT 2.3 Bladder 20.0 litre NBR, Ø22 mm 7/8"-14UNF HK IHV 20.0 ltr

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.